-
Add to cartQuick ViewA-Pillar – (Stock Car)
$28.00Steel A-pillars to replace the heavy OEM a-pillars on all 80’s vintage G-body roofs. Perfect for stock cars and hobby stocks.
Add to cartQuick View -
Add to cartQuick ViewAluminum Kit, Dash (IMCA/USRA/WISSOTA Stock Car) – Gloss Black (2016-2022)
$325.00Dash aluminum kit used on IMCA, USRA or WISSOTA stock cars. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick ViewAluminum Kit, Interior Cockpit (USRA or WISSOTA Stock Car) – Gloss Black (2016-2022)
$420.00Interior cockpit aluminum kit used on USRA or Wissota stock cars. This is a full cockpit. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick ViewAluminum Kit, Interior Wall (IMCA/USRA Stock Car) – Gloss Black (2016-2022)
$300.00Interior wall aluminum kit used on IMCA or USRA stock cars. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick ViewAluminum Kit, Rear Deck (IMCA/USRA/WISSOTA Stock Car) – Gloss Black (2016-2022)
$375.00Rear deck and firewall used on IMCA, USRA or WISSOTA stock cars. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick ViewB-Pillar – (Stock Car)
$25.00Aluminum B-pillars to replace the OEM pillars on all 1980’s & 2000’s vintage bodies. Perfect for stock cars and hobby stocks.
2″ Wide Perfectly sized to rivet to roof and trim to fit the quarter panel.
Steel
(Sold as pair, 1 LH and 1 RH)
Add to cartQuick View -
Add to cartQuick ViewBattery Box (11″)
$22.39Medieval premium lightweight battery tray with hold down bracket and bolts.
Add to cartQuick View -
Add to cartQuick ViewBattery Box, Bolt-On (11″)
$22.39Medieval premium lightweight Bolt On battery tray with hold down bracket and bolts.
Add to cartQuick View -
Add to cartQuick ViewBRACKET, 3 LINK, NSM MOD, BOLT ON – LH (MEDIEVAL ONLY 2016-2018)
$50.00BRACKET, 3 LINK, NSM MOD, BOLT ON – LH (MEDIEVAL ONLY 2016-2018)
Add to cartQuick View -
Add to cartQuick ViewBRACKET, 3 LINK, NSM MOD, BOLT ON – RH (MEDIEVAL ONLY 2016-2018)
$50.00BRACKET, 3 LINK, NSM MOD, BOLT ON – RH (MEDIEVAL ONLY 2016-2018)
Add to cartQuick View -
Add to cartQuick ViewBRACKET, CHASSIS PANHARD, BOLT ON – 3 INCH OFFSET (PAIR)
$50.00BRACKET, CHASSIS PANHARD, BOLT ON – 3 INCH OFFSET (PAIR)
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – (91-96 Cutlass/Regal)
$125.00This bumper is designed to fit the 91-96 Cutlass/Regal nose cones.
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – (2005 Monte)
$125.00This bumper is designed to fit the 2005 Monte Carlo nose cone.
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – (88 Monte 2-Piece)
$125.00This bumper is designed to fit the 1988 Monte Carlo nose cone.
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – (88 Monte w/ MD3)
$125.00This bumper is designed to fit the 1988 MD3 Monte Carlo nose cone.
Add to cartQuick View -
Add to cartQuick View
Bumper, Front – (91-96 Monte/Gran Prix/Lumina)
$125.00This bumper is designed to fit the 91-96 Monte Carlo nose cone.
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – (Late Model 2-Piece)
$160.00Late Model Front Bumper – 2-piece with tube mounting design.
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – (Medieval/Devilbiss Modified – 16″)
$87.00Front bumper to fit Medieval & Devilbiss XD1 Modified Chassis.
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – (Medieval/Devilbiss Modified – 21″)
$90.0021″ Front bumper to fit Medieval & Devilbiss XD1 Modified Chassis.
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – (Camaro – Dominator)
$125.00This bumper is designed to fit the Dominator brand Camaro nose cone.
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – (Camaro – MD3)
$125.00This bumper is designed to fit the MD3 Camaro nose cone.
Add to cartQuick View -
Add to cartQuick ViewBumper, Rear – (2005 Monte)
$100.00This bumper is designed to fit the 2005 Monte Carlo tail piece.
Add to cartQuick View -
Add to cartQuick ViewBumper, Rear – (88 Monte/ABC Universal)
$125.00This bumper is designed to fit the 1988 Monte Carlo and the ABC Universal tail piece.
Add to cartQuick View -
Add to cartQuick ViewBumper, Rear – (91-96 Monte/Gran Prix/Lumina)
$100.00This bumper is designed to fit the 91-96 Monte Carlo/Gran Prix tail piece.
Add to cartQuick View -
Add to cartQuick ViewBumper, Rear – (Medieval/Devilbiss Modified)
$70.00Rear bumper to fit Medieval & Devilbiss XD1 Modified Chassis.
Add to cartQuick View -
Add to cartQuick ViewCOLLAR, LOCK – 9/16″ (HOOD/TRUNK PINS)
$6.95ALUMINUM LOCK COLLAR PERFECT FOR SETTING THE HOOD AND TRUNK HEIGHTS ON OUR CHASSIS
(SOLD INDIVIDUALLY)
Add to cartQuick View -
Add to cartQuick ViewDecal Package
$9.95Add to cartQuick View -
Add to cartQuick ViewDoor Panel – LH/RH (Malibu-80’S)
$70.00Steel Door Panel – LH/RH. 1980’s Malibu door with single bend lines. Perfect for hobby stocks.
Add to cartQuick View -
Add to cartQuick ViewDoor Panel – LH/RH (Monte-88)
$70.00Steel Door Panel – LH/RH. 1988 Monte Carlo door with double bend lines.
Add to cartQuick View -
Add to cartQuick ViewFENDER, FABRICATED – LEFT (STOCK CAR)
$125.00This fully fabricated front fender works for most all style stock car bodies. Does have double bend lower monte carlo lines in it, perfect for meshing with our fabricated door panels.
Add to cartQuick View -
Add to cartQuick View
FENDER, FABRICATED – RIGHT (STOCK CAR)
$125.00This fully fabricated front fender works for most all style stock car bodies. Does have double bend lower monte carlo lines in it, perfect for meshing with our fabricated door panels.
Add to cartQuick View -
Select optionsQuick ViewFenders, Camaro – Left & Right Pair (Dominator)
$165.00Dominator- SS Street Stock Camaro Fenders- Left & Right Pair
Select optionsQuick View -
Add to cartQuick ViewFloorpan – Modified Chassis
$175.001/8″ aluminum floorpan to fit Medieval & Devilbiss modified chassis.
Add to cartQuick View -
Select optionsQuick ViewGift Certificate
$25.00 – $100.00Select optionsQuick View -
Add to cartQuick ViewGrill Screen – (Camaro Nose Cone)
$20.0014ga Steel Grill Screen designed to fit the MD3 Camaro nose cone.
Add to cartQuick View -
Add to cartQuick ViewHeader Protect Tube – Stock Car (LH) (2023-Present)
$25.00This is the (LH) driver side header protect tube for Medieval stock cars. (2023-Present)
Add to cartQuick View -
Add to cartQuick ViewHeader Protect Tube – Stock Car (RH) (2023-Present)
$25.00This is the (RH) passenger side header protect tube for Medieval stock cars. (2023-Present)
Add to cartQuick View -
Add to cartQuick ViewHinges, Trunk Lid
$24.58These brackets are used to mount the hood or trunk lid on all stock bodies.
Sold as a pair.
Add to cartQuick View -
Add to cartQuick ViewHoldown Bracket – Radiator (2022 & OLDER)
$22.40This is a radiator hold down bracket used on all Medieval hobby stock and stock car chassis. (2022 & Older)
Add to cartQuick View -
Add to cartQuick ViewHoldown Bracket – Radiator (2023 to PRESENT)
$25.00This is a radiator hold down bracket used on all Medieval stock car chassis. (2023 to Present)
Add to cartQuick View -
Add to cartQuick ViewHOOD – ALUMINUM (STOCK CAR)
$280.00This fully fabricated aluminum hood for stock cars. Perfect for meshing with our 2 piece fabricated front fenders.
Add to cartQuick View -
Select optionsQuick ViewHood Scoop, Air Cleaner (Dirt Defender)
$37.00 – $37.99Dirt Defender 3.5″ hood scoop has been designed with elements of both aerodynamics, as well as down force, making this product not only great looking but also functional. Made in USA.
Select optionsQuick View -
Add to cartQuick ViewKit-Radiator Support Assembly (Hobby & Stock Car)
$195.00- In 2022 the radiator support assemblies on all Medieval Chassis were upgraded to a bolt on unit which allow it to be replaced in the event of a wreck.
- Kit comes unwelded with all part necessary to install.
- This kit can also be retrofited onto all older Medieval chassis.
- Can ship via all regular methods.
Add to cartQuick View -
Add to cartQuick ViewMD3 MONTE SS NOSE CONE
$192.00These high-impact plastic nose halves for circle track racing feature a 2-piece design with large 1” overlap for easy assembly and added strength with increased front angle for Performance Bodies. Just the ticket for IMCA type stock cars. (Black)
Add to cartQuick View -
Add to cartQuick ViewMOUNT, PANHARD BAR – (3 HOLE 2X2) WEHRS
$66.00Panhard bar mount used on chassis side of Medieval/Devilbiss modifieds and sport mods.
Add to cartQuick View -
Add to cartQuick ViewMOUNT, PANHARD BAR – (3 LINK CLIMBER) WEHRS
$145.00Panhard bar mount used on chassis side of Medieval/Devilbiss modifieds and sport mods.
Add to cartQuick View -
Add to cartQuick ViewMount, Rub Rail – Modified (Right Side)
$50.00This is the inner mount that bolts to a Medieval or Devilbiss modified chassis and supports the outer rub rail. Qty 2 needed per chassis.
Add to cartQuick View -
Add to cartQuick ViewMount, Rub Rail – Stock Car (Right Side-Front) (2023-Present)
$50.00This is the FRONT inner mount that bolts to a Medieval stock car chassis and supports the outer rub rail.Add to cartQuick View -
Add to cartQuick ViewMount, Rub Rail – Stock Car (Right Side-Rear) (2023-Present)
$50.00This is the REAR inner mount that bolts to a Medieval stock car chassis and supports the outer rub rail.
Add to cartQuick View -
Add to cartQuick ViewMount, Weight Jack Bolt
$25.70Stop messing around using 1 nut from the local hardware store to make a weight jack mount. (Sold Individually)
Add to cartQuick View -
Select optionsQuick ViewNose Cone, 88 Monte Carlo – Kit (Dominator)
$155.00Dominator SS Street Stock Nose Kit
Select optionsQuick View -
Select optionsQuick ViewNose Cone, Camaro – Kit (Dominator)
$199.99Dominator- SS Street Stock Camaro Style Nose Kit
Select optionsQuick View -
Select optionsQuick ViewNose Cone, Camaro – Kit (MD3)
$194.00MD3 – Camaro Stock Car Nose Kit
Select optionsQuick View -
Add to cartQuick ViewNUT, JAM, 3/4-10 (RH)
$1.003/4-10 Jam Nut
Used in:
Non-Medieval Adjustable Rear Shock Mount Kit (MMX 801-202)
Medieval Adjustable Rear Shock Mount Retro Fit (MMX 801-202M)
Shock Mount – Adjustable – Rear (MMX 401-802)
**Sold Individually**
Add to cartQuick View -
Add to cartQuick ViewPlate, Hood Pin Mount
$2.24These aluminum hood pins plates are thicker to provide increased durability versus the thin steel ones normally found in kits. Sized for ½ diameter hood pin. (Sold as pair)
Add to cartQuick View -
Add to cartQuick ViewPlates, 4 Link LH – Modified Chassis
$50.00Replacement LH four link plates used on Medieval & Devilbiss modified chassis.
Qty 2, sold as pair
Used for A-Mods, B-Mods, MWM, Limited Mods
Add to cartQuick View -
Add to cartQuick ViewPlates, 4 Link RH – Modified Chassis
$50.00Replacement RH four link plates used on Medieval & Devilbiss modified chassis.
Qty 2, sold as pair
Used for A-Mods, B-Mods, MWM, Limited Mods
Add to cartQuick View -
Add to cartQuick ViewPlates, Bumper Mount
$11.20These bumper mount plates can be welded to your chassis to allow the use of our bumpers. (Sold as pair)
Add to cartQuick View -
Add to cartQuick ViewQUARTER PANEL-LOWER, 2-PIECE, FABRICATED – LEFT (STOCK CAR)
$120.00This fully fabricated rear quarter panels works for most all style stock car bodies. Does have double bend lower monte carlo lines in it, perfect for meshing with our fabricated door panels.
Add to cartQuick View -
Add to cartQuick View
QUARTER PANEL-LOWER, 2-PIECE, FABRICATED – RIGHT (STOCK CAR)
$120.00This fully fabricated rear quarter panels works for most all style stock car bodies. Does have double bend lower monte carlo lines in it, perfect for meshing with our fabricated door panels.
Add to cartQuick View
Body And Chassis
