-
Add to cartQuick View
Aluminum Kit, Dash (IMCA/USRA/WISSOTA Stock Car) – Gloss Black (2016-2022)
Dash aluminum kit used on IMCA, USRA or WISSOTA stock cars. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick View
Aluminum Kit, Interior Cockpit (USRA or WISSOTA Stock Car) – Gloss Black (2016-2022)
Interior cockpit aluminum kit used on USRA or Wissota stock cars. This is a full cockpit. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick View
Aluminum Kit, Rear Deck (IMCA/USRA/WISSOTA Stock Car) – Gloss Black (2016-2022)
Rear deck and firewall used on IMCA, USRA or WISSOTA stock cars. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick View
Brake Bias Adjuster – Crank (34″)
Crank-type balance bar adjuster cable. Enables the driver to easily adjust the brake bias. For use with dual master cylinders.
Add to cartQuick View -
Add to cartQuick View
COLLAPSIBLE STEERING COLUMN – SWEET 405-10310
SWEET MFG 405-10310 COLLAPSIBLE STEERING COLUMN
Add to cartQuick View -
Add to cartQuick View
Decal Package
$9.95Add to cartQuick View -
Select optionsQuick View
Gift Certificate
$25.00 – $100.00Select optionsQuick View -
Add to cartQuick View
Mount, Throttle Pedal – Adjustable (Hobby Stock)
Mount, Throttle Pedal – Adjustable (Hobby Stock)
Bolts to aftermarket firewall for full adjustability.
Add to cartQuick View -
Add to cartQuick View
QUICKCAR, 2 – 1 Gauge Panel – 5″ Tach- OP/WH BK
QuickCar’s LED backlit Oil Pressure, 5” Tachometer, and Water Temperature standard mechanical gauges mounted in a black panel measuring 11-7/8” wide and 4-1/2” tall. Panel comes complete with all sending units, warning lights, and wiring for easy installation. Water Temp. gauge comes with a 1/2”-NPT adapter to mount in the intake of almost any high-performance engine while Oil Pressure has a standard 1/8”-NPT fitting for plumbing lines (sold separately). Tachometer has a 5” display from 0-10,000 RPM’s with a single high recall and can be used with a 4-cylinder, 6-cylinder, or V8 engine. Warning lights activate when Oil Pressure drops below 20 PSI, Water Temp. goes above 235°F.
Add to cartQuick View -
Add to cartQuick View
QUICKCAR, 2 – 1 GAUGE PANEL – OP/WT/TACH
QuickCar’s LED backlit Oil Pressure, 5” Tachometer, and Water Temperature standard mechanical gauges mounted in a checkered flag designed panel measuring 11-7/8” wide and 4-1/2” tall. Panel comes complete with all sending units, warning lights, and wiring for easy installation. Water Temp. gauge comes with a 1/2”-NPT adapter to mount in the intake of almost any high-performance engine while Oil Pressure has a standard 1/8”-NPT fitting for plumbing lines (sold separately). Tachometer has a 5” display from 0-10,000 RPM’s with a single high recall and can be used with a 4-cylinder, 6-cylinder, or V8 engine. Warning lights activate when Oil Pressure drops below 20 PSI, Water Temp. goes above 235°F.
Add to cartQuick View -
Add to cartQuick View
QUICKCAR, Gauge Wiring Harness Kit
This QuickCar 5 Foot Four Wire Ignition and Accessory Wiring Harness is for use with cars using a remote Ignition Box such as an MSD or FAST system.
Add to cartQuick View -
Add to cartQuick View
QUICKCAR, Ignition Panel w/ Flip Switch and Light
This QuickCar Switch Panel comes with 1 ignition switch and 1 starter button installed in a checkered black plate. The double pole ignition switch is covered with a red flip cover and has a red indicator light. The panel dimensions are 3-3/8″ wide and 4-1/4″ tall.
Add to cartQuick View -
Add to cartQuick View
QUICKCAR, Ignition Panel w/ Flip Switch And Light
This QuickCar Switch Panel comes with 1 ignition switch and 1 starter button installed in a checkered flag designed plate. The double pole ignition switch is covered with a red flip cover and has a red indicator light. The panel dimensions are 3-3/8″ wide and 4-1/4″ tall. Panel comes assembled and pre-wired with mounting holes already punched out to make installation simple.
Add to cartQuick View -
Add to cartQuick View
QUICKCAR, Master Disconnect Switch
This QuickCar Battery Master Disconnect Switch comes with a checkered flag square mounting Panel that measures 2-1/2”x2-1/2”
Add to cartQuick View -
Add to cartQuick View
QUICKCAR, Master Disconnect Switch
This QuickCar Battery Master Disconnect Switch comes with a black square mounting Panel that measures 2-1/2”x2-1/2”
Add to cartQuick View -
Add to cartQuick View
QUICKCAR, Mini Brake Bias Gauge (61-105) – Black
This QuickCar 2-Gauge Panel Kit is Vertical Mount Model that has Two 1,000 PSI Brake Bias Gauges that use 1/8 NPT Male Fittings.
Add to cartQuick View -
Add to cartQuick View
Seat Mount Bracket – Back (Stock Car)
This is the bracket used to hold the back of the seat to the chassis on on all Medieval hobby stock and stock car chassis.
Add to cartQuick View -
Add to cartQuick View
Shifter – 1– Lever
6061 Aluminum 1 lever shifter specifically designed for circle track racers!
Add to cartQuick View -
Add to cartQuick View
Shifter – 2– Lever
6061 Aluminum 2 lever shifter specifically designed for circle track racers!
Ergonomic and ultra lightweight open levers with correct spacing to allow easy shifting. The mount is designed as a multi piece configuration to allow for easy shifter hole cutting in your tunnel. The design also makes it much easier to assemble and install into the car without losing any parts.
Shift rod holes are 5/16 diameter and spaced ½” apart to give perfect alignment with shift rod and transmission.
Anodized a “dry slick” black for a sleek appearance.
Add to cartQuick View -
Add to cartQuick View
STEERING POST ASSEMBLY – MEDIEVAL STOCK CAR (SWEET BOX, NO QUICKENER) FOR SWEET COLLAPSIBLE COLUMN 405-10310
STEERING POST ASSEMBLY TO FIT OUR STOCK CAR CHASSIS
DESIGNED FOR USE WITH SWEET COLLAPSIBLE COULMN P/N: 405-10310
Add to cartQuick View -
Add to cartQuick View
Throttle Pedal, Bearing (AFCO 40292)
This pedal has a hollow splined shaft that allows you to change off-set and index arms to suit your car. The ball bearings provide smooth, bind free travel for total throttle control.
Add to cartQuick View -
Add to cartQuick View
Traction Tape Kit – Floorpan
Have safe foot control with this Traction Tape Kit. Apply this 3M brand self adhering traction tape to the bottom of your floorpan to create a safe, non skid surface.
Kit Includes: 3 Stripes of 6″ wide x 28″ long traction tape. Perfect amount to secure your foothold in the cockpit.
Add to cartQuick View