
Aluminum Kit, Rear Deck (IMCA/USRA/WISSOTA Stock Car) – Gloss Black (2016-2022)
$405.00
Rear deck and firewall used on IMCA, USRA or WISSOTA stock cars. Gloss Black (2016-2022)
- Description
Description
Rear deck and firewall used on IMCA, USRA or WISSOTA stock cars. Gloss Black (2016-2022)
You may also like…
-
Add to cartQuick View
Aluminum Kit, Dash (IMCA/USRA/WISSOTA Stock Car) – Gloss Black (2016-2022)
Dash aluminum kit used on IMCA, USRA or WISSOTA stock cars. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick View
Aluminum Kit, Interior Wall (IMCA/USRA Stock Car) – Gloss Black (2016-2022)
Interior wall aluminum kit used on IMCA or USRA stock cars. Gloss Black (2016-2022)
Add to cartQuick View
Related Products
-
Add to cartQuick View
Plates, Bumper Mount
These bumper mount plates can be welded to your chassis to allow the use of our bumpers. (Sold as pair)
Add to cartQuick View -
Add to cartQuick View
Mount, Throttle Pedal – Adjustable (Hobby Stock)
Mount, Throttle Pedal – Adjustable (Hobby Stock)
Bolts to aftermarket firewall for full adjustability.
Add to cartQuick View -
Add to cartQuick View
Throttle Pedal, Bearing (AFCO 40292)
This pedal has a hollow splined shaft that allows you to change off-set and index arms to suit your car. The ball bearings provide smooth, bind free travel for total throttle control.
Add to cartQuick View -
Add to cartQuick View
QUICKCAR, Gauge Wiring Harness Kit
This QuickCar 5 Foot Four Wire Ignition and Accessory Wiring Harness is for use with cars using a remote Ignition Box such as an MSD or FAST system.
Add to cartQuick View -
Add to cartQuick View
QUICKCAR, 2 – 1 GAUGE PANEL – OP/WT/TACH
QuickCar’s LED backlit Oil Pressure, 5” Tachometer, and Water Temperature standard mechanical gauges mounted in a checkered flag designed panel measuring 11-7/8” wide and 4-1/2” tall. Panel comes complete with all sending units, warning lights, and wiring for easy installation. Water Temp. gauge comes with a 1/2”-NPT adapter to mount in the intake of almost any high-performance engine while Oil Pressure has a standard 1/8”-NPT fitting for plumbing lines (sold separately). Tachometer has a 5” display from 0-10,000 RPM’s with a single high recall and can be used with a 4-cylinder, 6-cylinder, or V8 engine. Warning lights activate when Oil Pressure drops below 20 PSI, Water Temp. goes above 235°F.
Add to cartQuick View -
Add to cartQuick View
Bumper, Coupler
This coupler is designed to bolt onto the end of the Medieval/Devilbiss chassis. Allows the ability to trim the our front bumpers to get that perfect fit to the nose cone.
Sized for 1-3/4″ OD bumper tube.
(Sold in Pairs)
Add to cartQuick View -
Add to cartQuick View
Rub Rail – Internal (Stock Car Layback RH) (2011-2015)
Want to have a rub rail that is light, easily replaceable and offers improved protection then these internal rub rails are a must…..
Add to cartQuick View -
Add to cartQuick View
Brake Bias Adjuster – Crank (34″)
Crank-type balance bar adjuster cable. Enables the driver to easily adjust the brake bias. For use with dual master cylinders.
Add to cartQuick View -
Add to cartQuick View
Seat Mount Bracket – Back (Stock Car)
This is the bracket used to hold the back of the seat to the chassis on on all Medieval hobby stock and stock car chassis.
Add to cartQuick View -
Add to cartQuick View
STEERING POST ASSEMBLY – MEDIEVAL STOCK CAR (SWEET BOX, NO QUICKENER) FOR SWEET COLLAPSIBLE COLUMN 405-10310
STEERING POST ASSEMBLY TO FIT OUR STOCK CAR CHASSIS
DESIGNED FOR USE WITH SWEET COLLAPSIBLE COULMN P/N: 405-10310
Add to cartQuick View