Drum Brake Kit – Non Floater Ford 9″
$425.00
-Drum Brake Kit for non floater hobby stock rear ends.
-11″ drum drilled for both 5 x 5 and 5 x 4 3/4 bolt patterns.
-All new hardware, 2.770″ brake register diameter.
-Fits ford new big style housing ends.
(Sold as pair)
- Description
- Additional information
Description
-Drum Brake Kit for non floater hobby stock rear ends.
-11″ drum drilled for both 5 x 5 and 5 x 4 3/4 bolt patterns.
-All new hardware, 2.770″ brake register diameter.
-Fits ford new big style housing ends.
(Sold as pair)
Additional information
| Weight | 30 lbs |
|---|---|
| Dimensions | 12 × 12 × 24 in |
You may also like…
-
Add to cartQuick ViewAxles, Non-Floater 30″, 5×5, (28 or 31 Spline)
$325.00These new Superior 28 or 31-spline axles feature screw in studs in a 5×5 wheel bolt pattern, , ¼ thick heavy duty bearing retainer plates, and tapered wheel bearings pressed on.
Add to cartQuick View -
Add to cartQuick View
Axles, Non-Floater 30″, 5×4 3/4, (31 Spline)
$325.00These new Currie 31-spline axles feature press in studs in a 5×4 3/4 wheel bolt pattern, , ¼ thick heavy duty bearing retainer plates, and tapered wheel bearings pressed on.
Add to cartQuick View
Related Products
-
Add to cartQuick ViewQUICKCAR, Mini Brake Bias Gauge (61-105) – Black
$79.95This QuickCar 2-Gauge Panel Kit is Vertical Mount Model that has Two 1,000 PSI Brake Bias Gauges that use 1/8 NPT Male Fittings.
Add to cartQuick View -
Add to cartQuick ViewTab, Brake Line Mount
$1.68These brake line mount tabs are used to securely hold the adapter fitting used to adapter your brake line to your braided line.
Add to cartQuick View -
Add to cartQuick ViewDual Pedal Assembly – Reverse Mount (Titan 600-3342)
$212.99Titan’s dual pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall, away from engine heat.
Add to cartQuick View -
Add to cartQuick ViewBolt On, Caliper Bracket (Small GM) – HEAVY LR (MAXIMUM)
$75.00Bolt On, Caliper Bracket (Small GM)
Add to cartQuick View -
Add to cartQuick ViewBrake Caliper – Metric (LH)
$47.99Stock replacement single piston metric calipers for 78-88 GM metrics.
Add to cartQuick View -
Add to cartQuick ViewBrake Line Kit – 3/16″ Steel (Stock Car)
$285.00This 3/16″ steel brake line kit is specifically designed for our Medieval stock car chassis.
Add to cartQuick View -
Add to cartQuick ViewBrake Bias Adjuster – Crank (34″)
$34.99Crank-type balance bar adjuster cable. Enables the driver to easily adjust the brake bias. For use with dual master cylinders.
Add to cartQuick View -
Add to cartQuick ViewMaster Cylinder – Wilwood (1″ Bore)
$69.99Wilwood High-Volume Aluminum Master feature high pressure die-cast bodies from high-grade aluminum.
Add to cartQuick View -
Add to cartQuick ViewBrake Line Retainer Clip
$1.50These brake line retainer clips are used to hold the straight line adapters (6174029) into the brake line mount tabs (MMX601-103).
Add to cartQuick View -
Add to cartQuick ViewAdapter, Straight Line – 10mm-1.5 to AN4
$10.99These fittings have AN 4 thread at one end and 10mm-1.5 on the other end. It can be screwed into a GM metric caliper with 10mm-1.5 threads to adapt to a steel braided AN4 line.
Add to cartQuick View
