Bearing & Seal Kit – 78-88 Metric
$25.50
- Description
Description
The Bearing & Seal Kit contains larger diameter premium outer bearing, inner bearing and replacement seal for the 78-88 GM metric front rotor.
You may also like…
-
Add to cartQuick ViewRotor Assembly (5×5) – 78-88 Metric
$93.99This is an Afco rotor assembly for the 78-88 metric. It has 5/8 studs and a 5×5 bolt pattern.
Add to cartQuick View -
Add to cartQuick ViewNUT KIT – SPINDLE, 78-88 METRIC
$5.00Spindle nut kit for 78-88 GM spindles and 3 piece spindles.
Add to cartQuick View
Related Products
-
Add to cartQuick ViewBall Joint, Upper – 20032-2LF (Low Friction)
$55.99Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Add to cartQuick View
Rotor Assembly (5×5) – 78-88 Metric
$93.99This is an Afco rotor assembly for the 78-88 metric. It has 5/8 studs and a 5×5 bolt pattern.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – IMCA Tubular – Steel Cross Shaft (RH)
$69.99These are IMCA spec tubular upper a-arms. Steel cross shaft. LH is 8 1/12”, RH 8” from a-arm axis to center of ball joint. Cross shaft spacing center to center is 6-7/8″.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Lower – 20039 (78-88 Metric)
$27.99Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Out of stock
Read moreQuick ViewUpper Control Arm Wedge
$27.94This is a must have if you planning on using a longer upper ball joint to correct your roll center in the small metric chassis.
Read moreQuick View -
Add to cartQuick ViewShock Mount, Lower A-arm
$5.60Shock mount designed to be welded to the lower a-arm. (SOLD INDIVIDUALLY)
Add to cartQuick View -
Add to cartQuick ViewCup, Spring – Tapered
$13.38These tapered profile spring cups are manufactured from high strength steel and are designed to minimize any stretch and bending while still being lightweight. Has a 1/4″ hole on bottom to allow bolting to your weight jack bolt.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Lower – 20039LF (Low Friction) – 78-88 Metric
$54.99Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Add to cartQuick ViewBushing, Lower A-arm, (Rear) – 78-88 Metric
$35.45Replace your OEM metric upper bushings with steels bushings.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Tubular (Relocated Axis) – RH (MAXIMUM)
$69.99These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 8″ from a-arm axis to center of ball joint.
Add to cartQuick View
