A-Arm, Upper – Modified (Bare) – LH (MAXIMUM)
$55.94
Designed specifically for our sport mod and modifieds. Dual adjusters, heim joints and jam nuts not included.
- Description
Description
Designed specifically for our sport mod and modifieds. Dual adjusters, heim joints and jam nuts not included.
Uses K772 style screw in balljoints.
See picture for dimensions.
You may also like…
-
Add to cartQuick ViewA-Arm, Upper – Modified (Complete) – RH
$105.80Designed specifically for our sport mod and modifieds. They have dual adjusters for easy caster and camber adjustments. Heims joints and jam nuts included.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (Bare) – RH (MAXIMUM)
$55.94Designed specifically for our sport mod and modifieds. Dual adjusters, heim joints and jam nuts not included.
Add to cartQuick View -
Add to cartQuick ViewWrench – Ball Joint (K772) (MAXIMUM)
$6.71Wrench for QA1 Upper Screw in Balljoint (K772 style)
Add to cartQuick View -
Add to cartQuick ViewSPACER – TAPERED 1/2″
$1.25Tapered spacers used on our heim end style upper a-arms.
.510″ inside diameter, .225″ overall thickness, .991″ overall diameter
Zinc-plated for rust and corrosion preventionAdd to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (Complete) – LH
$105.80Designed specifically for our sport mod and modifieds. They have dual adjusters for easy caster and camber adjustments. Heims joints and jam nuts included.
Add to cartQuick View
Related Products
-
Add to cartQuick View
A-Arm, Upper – Modified (Complete) – RH
$105.80Designed specifically for our sport mod and modifieds. They have dual adjusters for easy caster and camber adjustments. Heims joints and jam nuts included.
Add to cartQuick View -
Add to cartQuick ViewCup, Spring – Tapered
$13.38These tapered profile spring cups are manufactured from high strength steel and are designed to minimize any stretch and bending while still being lightweight. Has a 1/4″ hole on bottom to allow bolting to your weight jack bolt.
Add to cartQuick View -
Add to cartQuick ViewShock Mount, Upper A-arm
$22.40These brackets are used to mount the front shock onto the top of upper a-arm.
Designed for the gm small 4 bolt pattern balljoints.
Sold individually.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Upper – 20032LF (Low Friction) 78-88 Metric
$54.99Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Select optionsQuick ViewA-Arm, Lower – (w/ Shock Mount) – 78-88 Metric – RH
$229.60 – $273.00These are stock lower a-arms that have our premium steel bushings, 20039 ball joint, front side shock mount, and sandblasted.
Select optionsQuick View -
Add to cartQuick ViewA-Arm, Upper – IMCA Tubular – Steel Cross Shaft (LH)
$63.99These are IMCA spec tubular upper a-arms. Steel cross shaft. LH is 8 1/12”, RH 8” from a-arm axis to center of ball joint. Cross shaft spacing center to center is 6-7/8″.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Tubular (Relocated Axis) – LH (MAXIMUM)
$69.99These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 9″ from a-arm axis to center of ball joint.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Lower – 20039 (78-88 Metric)
$25.99Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Lower-Adjustable w/ STD Stud (QA1 K6117)
$69.99Lower Ball Joint w/ Stock Length Stud – QA1 1210-109 (K6117)
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Tubular (Relocated Axis) – RH (MAXIMUM)
$69.99These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 8″ from a-arm axis to center of ball joint.
Add to cartQuick View
