A-Arm, Upper – Tubular (Relocated Axis) – RH (MAXIMUM)
$69.99
These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 8″ from a-arm axis to center of ball joint.
- Description
- Additional information
Description
These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 8″ from a-arm axis to center of ball joint.
There will be a large amount of washers in the front bolt hole, this is designed like this to relocate the axis.
See picture for proper mounting shims.
Use 1/2″ or 1″ tall balljoint, mounted on bottom side of a-arm.
Additional information
Weight | 11 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |