A-Arm, Upper – USRA (Bare) – RH
$55.94
“Designed specifically for our USRA and Durrence Lane stock cars. They have a 6.75” center to center distance. Dual adjusters, heim joints and jam nuts not included.”
- Description
- Additional information
Description
“Designed specifically for our USRA and Durrence Lane stock cars. They have a 6.75” center to center distance. Dual adjusters, heim joints and jam nuts not included.”
Uses K772 style screw in balljoints.
See picture for dimensions.
Additional information
| Weight | 6 lbs |
|---|---|
| Dimensions | 12 × 10 × 3 in |
You may also like…
-
Add to cartQuick ViewA-Arm, Upper – USRA (Bare) – LH
$55.94Designed specifically for our USRA and Durrence Lane stock cars. They have a 6.75” center to center distance. Dual adjusters, heim joints and jam nuts not included.”
Add to cartQuick View -
Add to cartQuick ViewSPACER – TAPERED 1/2″
$1.25Tapered spacers used on our heim end style upper a-arms.
.510″ inside diameter, .225″ overall thickness, .991″ overall diameter
Zinc-plated for rust and corrosion preventionAdd to cartQuick View -
Select optionsQuick ViewBall Joint, Upper (K772) w/ QA1 Stud Taper for 78-88 Metric Spindle – USRA Stock Car
$59.99Ball Joint, Upper (K772) w/ QA1 Stud Taper for 78-88 Metric Spindle – USRA Stock Car
Housing P/N: 72110505
Stud P/N: 7219032-1, .5, STDSelect optionsQuick View -
Add to cartQuick ViewA-Arm, Upper – USRA (Complete) – RH
$105.80“Designed specifically for our USRA and CRUSA stock cars. They have a 6.75” center to center distance. Dual adjusters for easy caster and camber adjustments and heims joints and jam nuts included.”
Uses K772 style screw in balljoints. (Balljoint NOT included)
See picture for dimensions.
Add to cartQuick View -
Add to cartQuick ViewWrench – Ball Joint (K772) (MAXIMUM)
$6.71Wrench for QA1 Upper Screw in Balljoint (K772 style)
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – USRA (Complete) – LH
$105.80“Designed specifically for our USRA and CRUSA stock cars. They have a 6.75” center to center distance. Dual adjusters for easy caster and camber adjustments and heims joints and jam nuts included.”
Uses K772 style screw in balljoints. (Balljoint NOT included)
See picture for dimensions.
Add to cartQuick View
Related Products
-
Add to cartQuick ViewBushing, Lower A-arm, (Rear) – 78-88 Metric
$35.45Replace your OEM metric upper bushings with steels bushings.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Upper – 20032-2LF (Low Friction)
$55.99Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – IMCA Tubular – Steel Cross Shaft (LH)
$69.99These are IMCA spec tubular upper a-arms. Steel cross shaft. LH is 8 1/12”, RH 8” from a-arm axis to center of ball joint. Cross shaft spacing center to center is 6-7/8″.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Upper – 20032 (78-88 Metric)
$32.99Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Select optionsQuick ViewA-Arm, Lower – (Stock) – 78-88 Metric – LH
$254.00 – $303.00These are stock lower a-arms that have our premium steel bushings, 20039 ball joint installed, and sandblasted. – Upgrade ball joint option of 20038-1 available upon request.
Select optionsQuick View -
Select optionsQuick View
A-Arm, Lower – (Stock) – 78-88 Metric – RH
$254.00 – $303.00These are stock lower a-arms that have our premium steel bushings, 20039 ball joint installed, and sandblasted.
Select optionsQuick View -
Add to cartQuick ViewBall Joint, Lower – 106200381LF (Low Friction)
$46.95Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Add to cartQuick ViewSleeve, Ball Joint – Lower
$22.39Are sick of having to weld your 20038-1 ball joint into your stock metric lower a-arm?
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Tubular (Relocated Axis) – RH (MAXIMUM)
$69.99These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 8″ from a-arm axis to center of ball joint.
Add to cartQuick View -
Add to cartQuick ViewBolt, Weight Jack – 8″ Long
$18.991 diameter x 8 long weight jack bolt. (1″-8 Coarse Thread)
Add to cartQuick View
