Midplate – Modified Chassis (Medieval & Devilbiss)
$96.00
Used for a Chevy motor in Medieval or Devilbiss modified chassis.
- Description
Description
Used for a Chevy motor in Medieval or Devilbiss modified chassis.
You may also like…
-
Add to cartQuick ViewMotor Mount – Front (MAXIMUM)
$15.67These bolt-on side motor mounts are designed for chevy small block and fit most all chassis manufacturers.
Add to cartQuick View -
Add to cartQuick ViewMid Mount – Chevy Engine (MAXIMUM)
$24.58Used for a Chevy motor in Medieval Chassis Stock Cars. Also can be used in other brand chassis. (Sold as a pair)
Add to cartQuick View -
Add to cartQuick ViewLift Plate – Motor (MAXIMUM)
$18.44The motor lift plate bolts onto 2 BBI or 4 BBI manifolds and allows the engine to be lifted. Larger middle holes allow chain hooks to slip through. Integrated hooks allow use of longer chains without “bolting”. Four mounting holes to thread bolts into when not in use.
This lift plate provides a stable and easy lifting point and creates a seal over the intake for safe storage. Made from heavy gauge steel.
Add to cartQuick View
Related Products
-
Add to cartQuick ViewA-Arm, Upper – Modified (Bare) – RH (MAXIMUM)
$55.94Designed specifically for our sport mod and modifieds. Dual adjusters, heim joints and jam nuts not included.
Add to cartQuick View -
Add to cartQuick ViewRub Rail – Modified (Right Side)
$40.00Rub rail/nerf mount for the right side of Medieval & Devilbiss modified chassis.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (MEDIEVAL/DEVILBISS) – LH (MAXIMUM)
$154.95Designed for use on our Medieval/Devilbiss modified chassis and any other chassis with 6″ mount.
11.5″ center to center length.
Features a QA1 weld in upper balljoint housing to reduce weight and size.
Balljoint housing has a 14 degree angle to allow for full compression without binding the stud.
Uses dual heim joints as pivots which provides zero bind through travel, even when the arm has been ‘tweaked”.
Has 7/8″ slots in shaft allowing for improved caster adjustments.
Comes with 9029-238 stud which is 1″longer length.
See picture for additional dimensions.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (Complete) – LH
$105.80Designed specifically for our sport mod and modifieds. They have dual adjusters for easy caster and camber adjustments. Heims joints and jam nuts included.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (Bare) – LH (MAXIMUM)
$55.94Designed specifically for our sport mod and modifieds. Dual adjusters, heim joints and jam nuts not included.
Add to cartQuick View -
Add to cartQuick ViewQuick Change Pull Bar Mount – Forward
$45.00Add to cartQuick View -
Add to cartQuick ViewThrottle Rod Linkage Kit – Modified
$33.59Throttle linkage rod kit specifically designed for modified chassis.
Add to cartQuick View -
Add to cartQuick ViewQuick Change Pull Bar Mount – Standard (MAXIMUM)
$55.00Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (MEDIEVAL/DEVILBISS) – RH (MAXIMUM)
$154.95Designed for use on our Medieval/Devilbiss modified chassis and any other chassis with 6″ mount.
8.0″ center to center length.
Features a QA1 weld in upper balljoint housing to reduce weight and size.
Balljoint housing has a 14 degree angle to allow for full compression without binding the stud.
Uses dual heim joints as pivots which provides zero bind through travel, even when the arm has been ‘tweaked”.
Has 7/8″ slots in shaft allowing for improved caster adjustments.
Comes with 9029-220 stud which is standard length.
See picture for additional dimensions.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (Complete) – RH
$105.80Designed specifically for our sport mod and modifieds. They have dual adjusters for easy caster and camber adjustments. Heims joints and jam nuts included.
Add to cartQuick View
