Bolt On, Spring Perch – Offset (MAXIMUM)
$45.86
Bolt On, Spring Perch Offset
- Description
Description
Split spring perch design to allow installing without removing hubs onto 3” axle tube. This perch is offset (2.5”) so the back edge of the spring is in line with the center of the axle tube. This design allows for improved side bite and forward drive.
**Spring perch MUST be welded to rear end housing to keep from rotating**
**Picture shows QTY 2 – SOLD INDIVIDUALLY**
You may also like…
-
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – Extreme Drop (MAXIMUM)
$174.66Bolt On, Trailing Arm Bracket Kit Extreme Drop LR
Add to cartQuick View -
Add to cartQuick ViewBolt On, Spring Perch – Center (MAXIMUM)
$45.86Bolt On, Spring Perch Center
Add to cartQuick View -
Select optionsQuick ViewQuick Change Rear End – Assembly
$2,828.86Quick Change Rear End Assembly 10″ Alum Spool and Steel Tubes
Select optionsQuick View -
Select optionsQuick ViewQuick Change Rear End – Bare
$2,129.24Quick Change Rear End With 486 R&P 10″ Alum Spool and Steel Tubes.
Select optionsQuick View -
Add to cartQuick ViewQuick Change Mount, Upper Trailing Arm – w/ “PULL” Bushings – Metric (MAXIMUM)
$125.50This bolt on upper trailing arm mount is designed to allow use of a quick change into a stock GM metric chassis. Built with corrected pinion angle and our proven “Pull” Bushings.
NOTE: If installing on a Frankland quick change, the bracket will need to be modified and reinforced to fit.
Add to cartQuick View -
Add to cartQuick ViewBolt On, Caliper Bracket – Small GM (MAXIMUM)
$65.00Bolt On, Caliper Bracket (Small GM)
Add to cartQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – Multi Hole (MAXIMUM)
$146.66Bolt On, Trailing Arm Bracket Kit Multi Hole
Add to cartQuick View
Related Products
-
Add to cartQuick ViewMount, Weight Jack Bolt
$25.70Stop messing around using 1 nut from the local hardware store to make a weight jack mount. (Sold Individually)
Add to cartQuick View -
Add to cartQuick ViewSPRING, COILOVER – 1-7/8″ x 10″ EIBACH (145LB)
$72.99MOD LITE COILOVER SPRINGS
Add to cartQuick View -
Add to cartQuick ViewShock & Slider Adjuster (1″ COARSE X 11″ LONG)
$36.95Shock & Slider Adjuster (1″ COARSE X 11″ LONG)
Add to cartQuick View -
Select optionsQuick ViewSpring – 5″ X 10.5″ – Landrum
$78.99Landrum Performance Springs has racing spring technology down to a science. Landrum’s line of coil spring springs are made from high-grade chrome silicone for quality and consistency. All Landrum springs are manufactured to the closest tolerances and each one is dyno tested. This provides 100% certainty that you’re getting the exact spring rate you want!
5″ x 10.5″Select optionsQuick View -
Add to cartQuick ViewBrackets, Trailing Arm – HEAVY, Slotted (LR ONLY)
$100.00Designed for stock cars with a 7.5″ max trailing arm length.
This trailing arm bracket use common offset slugs (sold separately) to allow you to change the amount of lead or trail in the rear end. Simply replace the slug with different combination of offset slugs. Tack weld the slugs to secure them to the trailing arm.
This bracket is also built heavy, weigh 7.5lbs (with slugs) to help increase LR rear end weight.
Perfect for the guys that already have or Extreme or Xtrmer Drop brackets. Simply replace the LR bracket and have increase drive and adjustability.
(Sold individually)
(Slugs sold separately)
Add to cartQuick View -
Add to cartQuick ViewCup, Spring – Tapered
$13.38These tapered profile spring cups are manufactured from high strength steel and are designed to minimize any stretch and bending while still being lightweight. Has a 1/4″ hole on bottom to allow bolting to your weight jack bolt.
Add to cartQuick View -
Add to cartQuick ViewBolt, Weight Jack – 8″ Long
$18.991 diameter x 8 long weight jack bolt. (1″-8 Coarse Thread)
Add to cartQuick View -
Add to cartQuick View
Bolt On, Spring Perch – Center (MAXIMUM)
$45.86Bolt On, Spring Perch Center
Add to cartQuick View -
Select optionsQuick ViewSpring – 5.5″ X 9.5″ – Landrum
$78.99 – $98.99Landrum Performance Springs has racing spring technology down to a science. Landrum’s line of coil spring springs are made from high-grade chrome silicone for quality and consistency. All Landrum springs are manufactured to the closest tolerances and each one is dyno tested. This provides 100% certainty that you’re getting the exact spring rate you want!
5.5″ x 9.5″Select optionsQuick View -
Select optionsQuick ViewMedieval Streeter Shim (Steel)
$5.59 – $6.71Light weight steel shims to be used in the rear springs in a Street Stock Class. Have an integrated zip tie loop and come in 1/4″ and 1/8″ thickness.
Sold individually.
Select optionsQuick View
