A-Arm, Upper – USRA (Bare) – LH
$55.94
Designed specifically for our USRA and Durrence Lane stock cars. They have a 6.75” center to center distance. Dual adjusters, heim joints and jam nuts not included.”
- Description
- Additional information
Description
“Designed specifically for our USRA and Durrence Lane stock cars. They have a 6.75” center to center distance. Dual adjusters, heim joints and jam nuts not included.”
Uses K772 style screw in balljoints.
See picture for dimensions.
Additional information
| Weight | 6 lbs |
|---|---|
| Dimensions | 12 × 10 × 3 in |
You may also like…
-
Add to cartQuick ViewA-Arm, Upper – USRA (Complete) – RH
$105.80“Designed specifically for our USRA and CRUSA stock cars. They have a 6.75” center to center distance. Dual adjusters for easy caster and camber adjustments and heims joints and jam nuts included.”
Uses K772 style screw in balljoints. (Balljoint NOT included)
See picture for dimensions.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – USRA (Complete) – LH
$105.80“Designed specifically for our USRA and CRUSA stock cars. They have a 6.75” center to center distance. Dual adjusters for easy caster and camber adjustments and heims joints and jam nuts included.”
Uses K772 style screw in balljoints. (Balljoint NOT included)
See picture for dimensions.
Add to cartQuick View -
Add to cartQuick ViewSPACER – TAPERED 1/2″
$1.25Tapered spacers used on our heim end style upper a-arms.
.510″ inside diameter, .225″ overall thickness, .991″ overall diameter
Zinc-plated for rust and corrosion preventionAdd to cartQuick View -
Add to cartQuick ViewWrench – Ball Joint (K772) (MAXIMUM)
$6.71Wrench for QA1 Upper Screw in Balljoint (K772 style)
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – USRA (Bare) – RH
$55.94“Designed specifically for our USRA and Durrence Lane stock cars. They have a 6.75” center to center distance. Dual adjusters, heim joints and jam nuts not included.”
Add to cartQuick View -
Select optionsQuick ViewBall Joint, Upper (K772) w/ QA1 Stud Taper for 78-88 Metric Spindle – USRA Stock Car
$59.99Ball Joint, Upper (K772) w/ QA1 Stud Taper for 78-88 Metric Spindle – USRA Stock Car
Housing P/N: 72110505
Stud P/N: 7219032-1, .5, STDSelect optionsQuick View
Related Products
-
Add to cartQuick ViewBushing, Lower A-arm, (Rear) – 78-88 Metric
$35.45Replace your OEM metric upper bushings with steels bushings.
Add to cartQuick View -
Add to cartQuick ViewRotor Assembly (5×5) – 78-88 Metric
$93.99This is an Afco rotor assembly for the 78-88 metric. It has 5/8 studs and a 5×5 bolt pattern.
Add to cartQuick View -
Out of stock
Read moreQuick ViewUpper Control Arm Wedge
$27.94This is a must have if you planning on using a longer upper ball joint to correct your roll center in the small metric chassis.
Read moreQuick View -
Select optionsQuick ViewA-Arm, Lower – (w/ Shock Mount) – 78-88 Metric – RH
$254.00 – $303.00These are stock lower a-arms that have our premium steel bushings, 20039 ball joint, front side shock mount, and sandblasted.
Select optionsQuick View -
-11%
Add to cartQuick ViewBall Joint, Lower – 20038-1
Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
$18.99$16.99Add to cartQuick View -
Add to cartQuick ViewBushing, Lower A-arm, (Front) – 78-88 Metric
$35.45Replace your OEM metric upper bushings with steels bushings.
Add to cartQuick View -
Add to cartQuick ViewSpindle (RH) – Stock – 78-88 Metric
$119.83These are stock metric spindles that have been checked for straightness, sandblasted and painted black.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – IMCA Tubular – Steel Cross Shaft (RH)
$69.99These are IMCA spec tubular upper a-arms. Steel cross shaft. LH is 8 1/12”, RH 8” from a-arm axis to center of ball joint. Cross shaft spacing center to center is 6-7/8″.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Upper – 20032-2LF (Low Friction)
$55.99Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Lower-Adjustable w/ STD Stud (QA1 K6117)
$69.99Lower Ball Joint w/ Stock Length Stud – QA1 1210-109 (K6117)
Add to cartQuick View
