-
Add to cartQuick ViewSpacer, 5/8″ High Misalignment – 1-3/8″ Long
$9.505/8″ heim 1/2″ bolt high misalignment spacer 1-3/8″ long. Measured from the end of spacer to the heim.
- Measurement is not total overall length.
Add to cartQuick View -
Add to cartQuick ViewSpacer, 5/8″ High Misalignment – 1-3/4″ Long
$9.505/8″ heim 1/2″ bolt high misalignment spacer 1-3/4″ long. Measured from end of spacer to the heim.
- Measurement is not total overall length.
Add to cartQuick View -
Add to cartQuick ViewShock Mount, Narrow
$8.99Shock mount designed to be welded to the lower a-arm & suspension. (SOLD INDIVIDUALLY)
Add to cartQuick View -
Add to cartQuick View1/8″ Female NPT TO AN4 Male 90 Degree
$8.99This is an 1/8″ female to AN4 male 90° elbow adapter fitting.
Add to cartQuick View -
Add to cartQuick ViewSpacer, 5/8″ High Misalignment – 3/4″ Long
$8.755/8” high misalignment spacer 1/2″ ID 3/4” long. Measured from end of spacer to the heim.
- Measurement is not total overall length.
Add to cartQuick View -
Add to cartQuick ViewSpacer, 5/8″ High Misalignment – 1/2″ Long
$8.755/8″ heim 1/2″ bolt high misalignment spacer 1/2″ long. Measured from end of spacer to the heim.
- Measurement is not total overall length.
Add to cartQuick View -
Add to cartQuick ViewSpacer, 5/8″ High Misalignment – 1″ Long
$8.755/8″ heim 1/2″ bolt high misalignment spacer 1″ long. Measured from the end of the spacer to the heim.
- Measurement is not total overall length
Add to cartQuick View -
Add to cartQuick ViewDUST CAP – ROTOR, 78-88 METRIC (2.085 HUB ID)
$7.99Dust cap for for 78-88 GM rotors.
Add to cartQuick View -
Add to cartQuick ViewFitting, Straight Push Fit (AN 8)
$7.99Brass push-on style with straight steel hose ends for use with AN 8 fitting and line.
Add to cartQuick View -
Add to cartQuick ViewWrench – Spring Slider Nut (Wehrs Brand) (MAXIMUM)
$7.95Compact wrench to make adjusting your spring sliders easy.
Designed for Wehrs brand sliders but will work on any other that has a 2.25″ width.
Easy access versus crescent wrench.
Add to cartQuick View -
Add to cartQuick ViewWrench – Weight Jack Nut (1″) MAXIMUM
$7.95Compact wrench for 1″ jam nuts on weight jack bolts.
Easy access versus crescent wrench.
Add to cartQuick View -
Add to cartQuick ViewAdapter, Carb – Holley Carb to AN8
$7.49This is a Holley carb to AN8 adapter fitting.
Add to cartQuick View -
Add to cartQuick ViewCarburetor Bushings – Holley
$6.99Aluminum carburetor bushings.
Add to cartQuick View -
Add to cartQuick ViewAdapter, Spherical – Mod Lite (MAXIMUM)
$6.95Adapter used on MAXIMUM spherical bushing and mod lite upper and lower control arms.
Add to cartQuick View -
Add to cartQuick ViewCOLLAR, LOCK – 9/16″ (HOOD/TRUNK PINS)
$6.95ALUMINUM LOCK COLLAR PERFECT FOR SETTING THE HOOD AND TRUNK HEIGHTS ON OUR CHASSIS
(SOLD INDIVIDUALLY)
Add to cartQuick View -
Add to cartQuick ViewWrench – Ball Joint (K772) (MAXIMUM)
$6.71Wrench for QA1 Upper Screw in Balljoint (K772 style)
Add to cartQuick View -
Select optionsQuick ViewMedieval Streeter Shim (Steel)
$5.59 – $6.71Light weight steel shims to be used in the rear springs in a Street Stock Class. Have an integrated zip tie loop and come in 1/4″ and 1/8″ thickness.
Sold individually.
Select optionsQuick View -
Select optionsQuick ViewMedieval Streeter Shim (Aluminum)
$5.59 – $6.71Light weight aluminum shims to be used in the rear springs in a Street Stock Class. Have an integrated zip tie loop and come in 1/4″ and 1/8″ thickness.
Sold individually.
Select optionsQuick View -
Add to cartQuick ViewShock Mount, Lower A-arm
$5.60Shock mount designed to be welded to the lower a-arm. (SOLD INDIVIDUALLY)
Add to cartQuick View -
Add to cartQuick ViewWasher, Axle
$5.60Stop spending big money on rubber seals and sleeves to stop rear end grease from being pulled into the RH rear end tube. Sold as pair.
Add to cartQuick View -
Add to cartQuick ViewNUT KIT – SPINDLE, 78-88 METRIC
$5.00Spindle nut kit for 78-88 GM spindles and 3 piece spindles.
Add to cartQuick View -
Add to cartQuick ViewQuick Adjust Puck – 1/2″ ID
$5.00Quick adjust puck for suspension cages.
Add to cartQuick View -
Add to cartQuick ViewAdapter, Straight Line – 3/8″-24 IFF to AN4
$4.99These fittings have AN 4 thread at one end and 3/8″ IFF on the other end. Used to adapter a 3/16″ steel line a steel braided AN4 line.
Add to cartQuick View -
Add to cartQuick ViewBushing Washer – Rear Trailing Arms
$4.50If you are racing on a rough track or up against the cushion you will need these bushing washers to help hold the rubber from pushing out the end of the bushing housing.
Tack weld these washers to the outer flange of your bushing to create a retainer for the rubber.
SOLD as a PAIR
Add to cartQuick View -
Add to cartQuick ViewFitting, Straight Adapter – 1/8″ NPT Male to AN4 Male
$4.49This is an 1/8″ NPT Male to AN4 Male Straight Adapter Fitting
Add to cartQuick View -
Add to cartQuick ViewBolt Kit – Mud Cover
$4.00This kit allows you to secure your mud cover to your wheel without any modifications. Simply slip the nut clips over the tabs and bolt the mud cover in!
Product Features:
- Locking nut clip won’t fall off wheel
- Bolts have large head to fit mud covers
- Bolt has lead in to allow quick & easy attachment of mud cover
- Kit will fit most all mud covers, mud cover rings and bead locks
- Kit allows you to be legal per IMCA rules (new for 2018)
Add to cartQuick View -
Add to cartQuick ViewNUT, JAM, 3/4-16 (RH)
$2.59JAM NUT FOR 3/4″ OVERSIZED ROD END USED ON MOUNT STEERING POSTS
Add to cartQuick View -
-69%
Add to cartQuick ViewSEAL, GN SNOUT HUB INNER 1.375 X 1.875
Grand national snout inner seal replacement.
- .250″ wide
- 1.875″ O.D.
- 1.375″ I.D.
- Sold individually
$7.99$2.50Add to cartQuick View -
Add to cartQuick ViewPlate, Hood Pin Mount
$2.24These aluminum hood pins plates are thicker to provide increased durability versus the thin steel ones normally found in kits. Sized for ½ diameter hood pin. (Sold as pair)
Add to cartQuick View -
Add to cartQuick ViewNUT, JAM, 3/4-10 (RH)
$2.003/4-10 Jam Nut
Used in:
Non-Medieval Adjustable Rear Shock Mount Kit (MMX 801-202)
Medieval Adjustable Rear Shock Mount Retro Fit (MMX 801-202M)
Shock Mount – Adjustable – Rear (MMX 401-802)
**Sold Individually**
Add to cartQuick View -
Add to cartQuick ViewNUT, JAM, 5/8-18 (RH)
$1.995/8-18 Jam Nut (RH)
Add to cartQuick View -
Add to cartQuick ViewTab, Brake Line Mount
$1.68These brake line mount tabs are used to securely hold the adapter fitting used to adapter your brake line to your braided line.
Add to cartQuick View -
Add to cartQuick ViewBrake Line Retainer Clip
$1.50These brake line retainer clips are used to hold the straight line adapters (6174029) into the brake line mount tabs (MMX601-103).
Add to cartQuick View -
Add to cartQuick ViewSPACER – TAPERED 1/2″
$1.25Tapered spacers used on our heim end style upper a-arms.
.510″ inside diameter, .225″ overall thickness, .991″ overall diameter
Zinc-plated for rust and corrosion preventionAdd to cartQuick View -
Add to cartQuick ViewNUT, JAM, 5/8-18 (LH)
$1.095/8-18 Jam Nut (LH)
Add to cartQuick View -
Add to cartQuick ViewTab, Rub Rail
$0.85These tabs are used to hold the internal rub rails on the chassis. Also can be used for any other mounting needs.
Add to cartQuick View
Products
