-
Add to cartQuick ViewFuel Cell, RCI – 16 gal (Red)
$314.99RCI Circle Track steel can fuel cells are manufactured with a cross-linked, high strength polyethylene bladder.
Drop Ships direct from Manufacturer
Add to cartQuick View -
Add to cartQuick ViewHOOD – ALUMINUM (STOCK CAR)
$303.00This fully fabricated aluminum hood for stock cars. Perfect for meshing with our 2 piece fabricated front fenders.
Add to cartQuick View -
Select optionsQuick ViewA-Arm, Lower – (w/ Shock Mount) – 78-88 Metric – RH
$254.00 – $303.00These are stock lower a-arms that have our premium steel bushings, 20039 ball joint, front side shock mount, and sandblasted.
Select optionsQuick View -
Select optionsQuick View
A-Arm, Lower – (w/ Shock Mount) – 78-88 Metric – LH
$254.00 – $303.00These are stock lower a-arms that have our premium steel bushings, 20039 ball joint, front side shock mount, and sandblasted. Upgrade ball joint option of 20038-1 available upon request.
Select optionsQuick View -
Select optionsQuick ViewA-Arm, Lower – (Stock) – 78-88 Metric – RH
$254.00 – $303.00These are stock lower a-arms that have our premium steel bushings, 20039 ball joint installed, and sandblasted.
Select optionsQuick View -
Select optionsQuick View
A-Arm, Lower – (Stock) – 78-88 Metric – LH
$254.00 – $303.00These are stock lower a-arms that have our premium steel bushings, 20039 ball joint installed, and sandblasted. – Upgrade ball joint option of 20038-1 available upon request.
Select optionsQuick View -
Add to cartQuick ViewGEARBOX, STEERING – 800 SERIES 12:1 RATIO
$299.99These OEM aftermarket power steering boxes have new inner working components with a re-manufactured housing. Fits most 1964-1988 GM passenger cars.
Perfect for USRA/IMCA/Wissota hobby stock cars.
- 6 AN hose fittings.
- 3/4″ 30-spline input.
- 12:1 Internal Ratio
Add to cartQuick View -
Add to cartQuick ViewSTEERING POST ASSEMBLY – MEDIEVAL STOCK CAR (SWEET BOX, NO QUICKENER) FOR SWEET COLLAPSIBLE COLUMN 405-10310
$295.00STEERING POST ASSEMBLY TO FIT OUR STOCK CAR CHASSIS
DESIGNED FOR USE WITH SWEET COLLAPSIBLE COULMN P/N: 405-10310
Add to cartQuick View -
Add to cartQuick ViewBrake Line Kit – 3/16″ Steel (Stock Car)
$285.00This 3/16″ steel brake line kit is specifically designed for our Medieval stock car chassis.
Add to cartQuick View -
Select optionsQuick ViewA-Arm, Lower – Chevelle w/ QA1 Low Friction Balljoint – RH
$280.00These are Chevelle reproduction lower a-arms that have premium steel bushings, QA1 ball joint (1210-510). STD or +.5″ stud available. These lower a-arms do not have a shock mount installed.
Bushings to be positioned and welded by customer.
Used on most all modified chassis.
Select optionsQuick View -
Select optionsQuick View
A-Arm, Lower – Chevelle w/ QA1 Low Friction Balljoint – LH
$280.00These are Chevelle reproduction lower a-arms that have premium steel bushings, QA1 ball joint (1210-510). STD or +.5″ stud available. These lower a-arms do not have a shock mount installed.
Bushings to be positioned and welded by customer.
Used on most all modified chassis.
Select optionsQuick View -
Add to cartQuick ViewFuel Cell, Mod Lite – 5 gal (MAXIMUM)
$266.005 gallon useable volume, 5052 aluminum alloy fuel cell. Fully TIG welded and pressure tested.
Add to cartQuick View -
Add to cartQuick ViewSTEERING POST ASSEMBLY – MEDIEVAL MODIFIED
$265.00STEERING POST ASSEMBLY TO FIT OUR MODIFIED CHASSIS
USES A 13/16″-36 SPLINE U-JOINT TO CONNECT TO SWEET OR KSE GEARBOX
3/4″ DOM TUBING, LEFT LONG TO TRIM AND INSTALL QUICK RELEASE
USES (2) 3/4″ OVERSIZED ROD END AND JAM NUTS TO MOUNT (NOT INCLUDED)
Add to cartQuick View -
Add to cartQuick ViewDual Pedal Assembly – Reverse Mount (Wilwood 340-11299)
$260.99Wilwoods new Adjustable Mount Pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall, away from engine heat.
Add to cartQuick View -
Add to cartQuick ViewHEADERS – SCHOENFELD – IMCA HOBBY STOCKS (CRATES)
$259.95IMCA HOBBY STOCK LEGAL FOR CRATE MOTORS
(1-5/8” DIA, 3” X 5” COLL DIA/LENGTH)
Add to cartQuick View -
Add to cartQuick View
HEADERS – SCHOENFELD – HOBBY STOCKS – IMCA (CLAIM MOTOR)
$259.95IMCA HOBBY STOCK LEGAL FOR CLAIM MOTORS
(1-5/8” DIA, 3” X 5” COLL DIA/LENGTH)
Add to cartQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – HEAVY, Single Hole Kit (MAXIMUM)
$259.95Bolt On, Trailing Arm Bracket Kit – HEAVY, Single Hole (Kit)
Add to cartQuick View -
Add to cartQuick ViewHEADER – HOOKER – SHORTIE (USRA HOBBY STOCK & WISSOTA STREET STOCK)
$259.95Add to cartQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – HEAVY, Slotted Kit (MAXIMUM)
$259.95Bolt On, Trailing Arm Bracket Kit – HEAVY, Slotted (Kit)
Add to cartQuick View -
Select optionsQuick ViewHUB ASSEMBLY – 2.5″ GRAND NATIONAL
$253.99 – $255.99Sold individually
Select optionsQuick View -
Add to cartQuick ViewFUEL LINE KIT – STOCK CAR (AN 8) (MEDIEVAL)
$250.00Add to cartQuick View -
Select optionsQuick View
Aluminum Kit, Interior Cockpit (USRA or WISSOTA Stock Car) – (2023-PRESENT)
$247.00Interior cockpit aluminum kit used on USRA or Wissota stock cars. This is a full cockpit. (2023-Present)
Select optionsQuick View -
Select optionsQuick View
Aluminum Kit, Interior Wall (IMCA Stock Car) (2023-PRESENT)
$247.00Interior wall aluminum kit used on IMCA stock cars. (2023-Present)
Select optionsQuick View -
Add to cartQuick ViewAluminum Kit, Interior Wall (IMCA/USRA Stock Car) – Gloss Black (2016-2022)
$247.00Interior wall aluminum kit used on IMCA or USRA stock cars. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – 3.5″ SLOTTED (MAXIMUM)
$240.00Add to cartQuick View -
Add to cartQuick ViewFloorpan – Modified Chassis
$227.501/8″ aluminum floorpan to fit Medieval modified chassis.
Add to cartQuick View -
Add to cartQuick ViewSTEERING POST ASSEMBLY – MEDIEVAL STOCK CAR (AFTERMARKET BOX, NO QUICKENER)
$221.70STEERING POST ASSEMBLY TO FIT OUR STOCK CAR CHASSIS
USES A 13/16″-36 SPLINE U-JOINT TO CONNECT TO SWEET OR KSE GEARBOX
3/4″ DOM TUBING, LEFT LONG TO TRIM AND INSTALL QUICK RELEASE
USES (2) 3/4″ OVERSIZED ROD END AND JAM NUTS TO MOUNT (NOT INCLUDED)
Add to cartQuick View -
Add to cartQuick ViewDual Pedal Assembly – Reverse Mount (Titan 600-3342)
$212.99Titan’s dual pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall, away from engine heat.
Add to cartQuick View -
Add to cartQuick ViewSTEERING POST ASSEMBLY – MEDIEVAL HOBBY STOCK
$210.50STEERING POST ASSEMBLY TO FIT OUR HOBBY STOCK CHASSIS
USES A 3/4-30 SPLINE U-JOINT TO CONNECT TO THE GEARBOX
3/4″ DOM TUBING, LEFT LONG TO TRIM AND INSTALL QUICK RELEASE
USES (2) 3/4″ OVERSIDED ROD END AND JAM NUTS TO MOUNT (NOT INCLUDED)
Add to cartQuick View -
Add to cartQuick ViewLT1 Performance Exhaust Manifold Adapters
$209.95These adapters allow you to bolt the LT1 style cast exhaust manifolds to any standard GM head. They provide consistent clamping force on the exhaust gaskets, space the exhaust manifold away from the valve cover and are profiled from square shaped port on the head to the d shaped port on the manifold allowing for a smooth transition and increased flow.
Add to cartQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – XTREMER KIT (MAXIMUM)
$205.95Bolt On, Trailing Arm Bracket Kit – XTREMER
Add to cartQuick View -
Select optionsQuick ViewNose Cone, Camaro – Kit (Dominator)
$199.99Dominator- SS Street Stock Camaro Style Nose Kit
Drop Ships direct from Manufacturer
Select optionsQuick View -
Add to cartQuick ViewBrackets, Trailing Arm – HEAVY, Slotted (Kit)
$199.95Designed for stock cars with a 7.5″ max trailing arm length.
These trailing arm brackets use common offset slugs (sold separately) to allow you to change the amount of lead or trail in the rear end. Simply replace the slug with different combination of offset slugs. Tack weld the slugs to secure them to the trailing arm.
This bracket is also built heavy, weighs 7.5lbs (with slugs) to help increase LR rear end weight.
Will increase drive and adjustability.
(Sold as a pair)
(Slugs sold separately)
Add to cartQuick View -
Add to cartQuick ViewAxle, 32″ GN Gun Drilled (31 Spline)
$199.5029.5″ Premium GN gun drilled axle.
Add to cartQuick View -
Add to cartQuick View
Axle, 29.5″ GN Gun Drilled (31 Spline)
$199.5029.5″ Premium GN gun drilled axle.
Add to cartQuick View -
Add to cartQuick ViewThrottle Pedal, Bearing (AFCO 40292)
$197.99This pedal has a hollow splined shaft that allows you to change off-set and index arms to suit your car. The ball bearings provide smooth, bind free travel for total throttle control.
Add to cartQuick View -
Add to cartQuick ViewSpindle, (LH) – Mod Lite
$195.00Spindle, LH – Medieval Mod Lite
Add to cartQuick View -
Add to cartQuick ViewSpindle, (RH) – Mod LIte
$195.00Spindle, RH – Medieval Mod Lite
Add to cartQuick View -
Add to cartQuick ViewKit-Radiator Support Assembly (Hobby & Stock Car)
$195.00- In 2022 the radiator support assemblies on all Medieval Chassis were upgraded to a bolt on unit which allow it to be replaced in the event of a wreck.
- Kit comes unwelded with all part necessary to install.
- This kit can also be retrofited onto all older Medieval chassis.
- Can ship via all regular methods.
Add to cartQuick View -
Add to cartQuick ViewFAN SHROUD – 31″ 17″ FAN (2023 & PRESENT)
$189.00Aluminum fan shroud for 31″ radiator and 17″ fan.
(Picture may vary from actual product)
Add to cartQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – 2.5″ SLOTTED (MAXIMUM)
$185.00Bolt On, Trailing Arm Bracket Kit – (2.5″ SLOTTED)
Add to cartQuick View -
Add to cartQuick ViewTrailing Arm, Lower – DOGBONE w/ “Spherical” Bushing (MAXIMUM)
$183.99Medieval Spherical “Dogbone” Lower Trailing Arm
Add to cartQuick View -
Add to cartQuick ViewFAN SHROUD – 31″ 17″ FAN (2022 & OLDER)
$180.00Aluminum fan shroud for 31″ radiator and 17″ fan.
(Picture may vary from actual product)
Add to cartQuick View -
Select optionsQuick ViewNose Cone, Camaro – Kit (MD3)
$179.00MD3 – Camaro Stock Car Nose Kit
Drop Ships direct from Manufacturer
Select optionsQuick View -
Select optionsQuick ViewSPINDLE-METRIC-LONG ARM (3-PIECE)
$8.39 – $175.99The advanced engineering techniques allowed for the recreation of an OEM spec spindle in a newly forged, heat-treated steel design that is stronger than the original. The unique three-piece construction provides for fast, convenient and affordable replacement of individual components in the event of a crash.
Select optionsQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – Extreme Drop (MAXIMUM)
$174.66Bolt On, Trailing Arm Bracket Kit Extreme Drop LR
Add to cartQuick View -
Add to cartQuick ViewStands, Setup (Medieval)
$168.00ULTRA LIGHT WEIGHT AT ONLY 29 LBS EACH
COLLAPSE FOR EASY AND COST EFFECTIVE SHIPPING
DISASSEMBLE FOR EASY STORAGE OVER THE OFF SEASON
RAISES THE CAR 12” OFF THE GROUND FOR BETTER ACCESS
WHEEL PAD AREA IS APPROX 12” X 14”
POWDERCOATED GLOSS BLACK
ALL HARDWARE INCLUDED
MAX #1000 WEIGHT LIMIT PER STAND
SOLD PER PAIR
Add to cartQuick View -
Select optionsQuick ViewNose Cone, 88 Monte Carlo – Kit (Dominator)
$167.00Dominator SS Street Stock Nose Kit
Drop Ships direct from Manufacturer
Select optionsQuick View -
Add to cartQuick ViewQuick Change Mount, Upper Trailing Arm – w/ “SPHERICAL” Bushings – Metric (MAXIMUM)
$166.99This bolt on upper trailing arm mount is designed to allow use of a quick change into a stock GM metric chassis. Built with corrected pinion angle and our proven “Spherical” Bushings.
NOTE: If installing on a Frankland quick change, the bracket will need to be modified and reinforced to fit.
Add to cartQuick View -
Select optionsQuick ViewFenders, Camaro – Left & Right Pair (Dominator)
$165.00Dominator- SS Street Stock Camaro Fenders- Left & Right Pair
Select optionsQuick View -
Select optionsQuick ViewTail Piece, 88 Monte Carlo – Kit (Dominator)
$165.00Dominator SS Street Stock Rear Bumper Kit
Drop Ships direct from Manufacturer
Select optionsQuick View -
Add to cartQuick ViewMD3 MONTE SS NOSE CONE
$164.00These high-impact plastic nose halves for circle track racing feature a 2-piece design with large 1” overlap for easy assembly and added strength with increased front angle for Performance Bodies. Just the ticket for IMCA type stock cars. (Black)
Drop Ships direct from Manufacturer
Add to cartQuick View -
Select optionsQuick ViewTail Piece, ABC Universal – Kit
$164.00ABC Universal Tail Piece – Kit
Drop Ships direct from Manufacturer
Select optionsQuick View -
Add to cartQuick ViewBumper, Front – (Late Model 2-Piece)
$160.00Late Model Front Bumper – 2-piece with tube mounting design.
Add to cartQuick View -
Add to cartQuick ViewFlex Saver – Powerglide (MAXIMUM)
$159.95Protect your expensive transmission investment with the MAXIMUM Performance Powerglide Flex Saver!
Add to cartQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – HEAVY, Single Hole LR ONLY (MAXIMUM)
$156.00Bolt On, Trailing Arm Bracket Kit – HEAVY, Single Hole (LR Only)
Add to cartQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – HEAVY, Slotted LR ONLY (MAXIMUM)
$156.00Bolt On, Trailing Arm Bracket Kit – HEAVY, Slotted (LR Only)
Add to cartQuick View -
Add to cartQuick ViewMidplate – Modified Chassis (Medieval)
$155.00Midplate – Modified Chassis (Medieval)
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (MEDIEVAL) – RH (MAXIMUM)
$154.95Designed for use on our Medieval modified chassis and any other chassis with 6″ mount.
8.0″ center to center length.
Features a QA1 weld in upper balljoint housing to reduce weight and size.
Balljoint housing has a 14 degree angle to allow for full compression without binding the stud.
Uses dual heim joints as pivots which provides zero bind through travel, even when the arm has been ‘tweaked”.
Has 7/8″ slots in shaft allowing for improved caster adjustments.
Comes with 9029-220 stud which is standard length.
See picture for additional dimensions.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (MEDIEVAL) – LH (MAXIMUM)
$154.95Designed for use on our Medieval modified chassis and any other chassis with 6″ mount.
11.5″ center to center length.
Features a QA1 weld in upper balljoint housing to reduce weight and size.
Balljoint housing has a 14 degree angle to allow for full compression without binding the stud.
Uses dual heim joints as pivots which provides zero bind through travel, even when the arm has been ‘tweaked”.
Has 7/8″ slots in shaft allowing for improved caster adjustments.
Comes with 9029-238 stud which is 1″longer length.
See picture for additional dimensions.
Add to cartQuick View
Products
