Bolt On, Spring Perch – Center (MAXIMUM)
$45.86
Bolt On, Spring Perch Center
- Description
Description
Split spring perch design to allow installing without removing hubs onto 3” axle tube. This perch is centered on the axle tube.
**Spring perch MUST be welded to rear end housing to keep from rotating**
**Picture shows QTY 2 – SOLD INDIVIDUALLY**
You may also like…
-
Add to cartQuick ViewBolt On, Caliper Bracket – Small GM (MAXIMUM)
$65.00Bolt On, Caliper Bracket (Small GM)
Add to cartQuick View -
Select optionsQuick ViewQuick Change Rear End – Assembly
$3,950.00Quick Change Rear End Assembly 10″ Alum Spool and Steel Tubes
Select optionsQuick View -
Select optionsQuick ViewQuick Change Rear End – Bare
$2,970.00Quick Change Rear End With 486 R&P 10″ Alum Spool and Steel Tubes.
Select optionsQuick View -
Add to cartQuick ViewQuick Change Mount, Upper Trailing Arm – w/ “PULL” Bushings – Metric (MAXIMUM)
$125.50This bolt on upper trailing arm mount is designed to allow use of a quick change into a stock GM metric chassis. Built with corrected pinion angle and our proven “Pull” Bushings.
NOTE: If installing on a Frankland quick change, the bracket will need to be modified and reinforced to fit.
Add to cartQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – Extreme Drop (MAXIMUM)
$174.66Bolt On, Trailing Arm Bracket Kit Extreme Drop LR
Add to cartQuick View
Related Products
-
Add to cartQuick ViewSpring – 5″ X 20″ (125) Swift
$149.00SWIFT 5″ X 20″ SPRING (125)
PERFECT FOR LR ON USRA STOCK CARS.
Add to cartQuick View -
Select optionsQuick ViewSpring – 5″ X 16″ – Landrum
$83.99Landrum Performance Springs has racing spring technology down to a science. Landrum’s line of coil spring springs are made from high-grade chrome silicone for quality and consistency. All Landrum springs are manufactured to the closest tolerances and each one is dyno tested. This provides 100% certainty that you’re getting the exact spring rate you want!
5″ x 16″Select optionsQuick View -
Add to cartQuick ViewShock & Slider Adjuster (1″ COARSE X 8″ LONG)
$32.95Shock & Slider Adjuster (1″ COARSE X 8″ LONG)
Add to cartQuick View -
Add to cartQuick ViewShock & Slider Adjuster (1″ COARSE X 11″ LONG)
$36.95Shock & Slider Adjuster (1″ COARSE X 11″ LONG)
Add to cartQuick View -
Add to cartQuick ViewDecal Package
$9.95Add to cartQuick View -
Add to cartQuick ViewCup, Spring – Tapered Extended (LR)
$22.34These tapered profile spring cups are manufactured from high strength steel and are designed to minimize any stretch and bending while still being lightweight. Has a 1/4″ hole on bottom to allow bolting to your weight jack bolt. This Spring Cup is extended to hold the spring while the chassis hikes for Northern Sport Mods and Limited Mods.
Add to cartQuick View -
Add to cartQuick ViewBolt On, Spring Perch – Offset (MAXIMUM)
$45.86Bolt On, Spring Perch Offset
Add to cartQuick View -
Add to cartQuick ViewSPRING, COILOVER – 1-7/8″ x 10″ EIBACH (200LB)
$72.99MOD LITE COILOVER SPRING
Add to cartQuick View -
Add to cartQuick ViewScrew Jack Mount, Clamp On – 1 1/2″ Tube (WEHRS)
$60.00Use this clamp on mount for the REAR shock mounts on all Medieval.
Uses Shock & Spring Adjuster (1″ coarse) (sold separately)
Add to cartQuick View -
Select optionsQuick View
Spring – 5″ X 10.5″ – Landrum
$90.99Landrum Performance Springs has racing spring technology down to a science. Landrum’s line of coil spring springs are made from high-grade chrome silicone for quality and consistency. All Landrum springs are manufactured to the closest tolerances and each one is dyno tested. This provides 100% certainty that you’re getting the exact spring rate you want!
5″ x 10.5″Select optionsQuick View
