Bolt On, Spring Perch – Offset (MAXIMUM)
$45.86
Bolt On, Spring Perch Offset
- Description
- Reviews (0)
Description
Split spring perch design to allow installing without removing hubs onto 3” axle tube. This perch is offset (2.5”) so the back edge of the spring is in line with the center of the axle tube. This design allows for improved side bite and forward drive.
**Spring perch MUST be welded to rear end housing to keep from rotating**
**Picture shows QTY 2 – SOLD INDIVIDUALLY**
Be the first to review “Bolt On, Spring Perch – Offset (MAXIMUM)”
You may also like…
-
Select optionsQuick ViewQuick Change Rear End – Bare
$2,129.24Quick Change Rear End With 486 R&P 10″ Alum Spool and Steel Tubes.
Select optionsQuick View -
Add to cartQuick ViewBolt On, Spring Perch – Center (MAXIMUM)
$45.86Bolt On, Spring Perch Center
Add to cartQuick View -
Select optionsQuick ViewQuick Change Rear End – Assembly
$2,828.86Quick Change Rear End Assembly 10″ Alum Spool and Steel Tubes
Select optionsQuick View -
Add to cartQuick ViewBolt On, Caliper Bracket – Small GM (MAXIMUM)
$42.50Bolt On, Caliper Bracket (Small GM)
Add to cartQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – Multi Hole (MAXIMUM)
$146.66Bolt On, Trailing Arm Bracket Kit Multi Hole
Add to cartQuick View -
Add to cartQuick ViewBolt On, Trailing Arm Bracket Kit – Extreme Drop (MAXIMUM)
$174.66Bolt On, Trailing Arm Bracket Kit Extreme Drop LR
Add to cartQuick View -
Add to cartQuick ViewQuick Change Mount, Upper Trailing Arm – w/ “PULL” Bushings – Metric (MAXIMUM)
$116.50This bolt on upper trailing arm mount is designed to allow use of a quick change into a stock GM metric chassis. Built with corrected pinion angle and our proven “Pull” Bushings.
NOTE: If installing on a Frankland quick change, the bracket will need to be modified and reinforced to fit.
Add to cartQuick View
Related Products
-
Select optionsQuick ViewMedieval Streeter Shim (Steel)
$5.59 – $6.71Light weight steel shims to be used in the rear springs in a Street Stock Class. Have an integrated zip tie loop and come in 1/4″ and 1/8″ thickness.
Sold individually.
Select optionsQuick View -
Select optionsQuick ViewSpring – 5.5″ X 9.5″ – Landrum
$73.99 – $78.99Landrum Performance Springs has racing spring technology down to a science. Landrum’s line of coil spring springs are made from high-grade chrome silicone for quality and consistency. All Landrum springs are manufactured to the closest tolerances and each one is dyno tested. This provides 100% certainty that you’re getting the exact spring rate you want!
5.5″ x 9.5″Select optionsQuick View -
Add to cartQuick ViewShock & Slider Adjuster (1″ COARSE X 8″ LONG)
$32.95Shock & Slider Adjuster (1″ COARSE X 8″ LONG)
Add to cartQuick View -
Add to cartQuick ViewCup, Spring – Tapered Extended (LR)
$22.34These tapered profile spring cups are manufactured from high strength steel and are designed to minimize any stretch and bending while still being lightweight. Has a 1/4″ hole on bottom to allow bolting to your weight jack bolt. This Spring Cup is extended to hold the spring while the chassis hikes for Northern Sport Mods and Limited Mods.
Add to cartQuick View -
Add to cartQuick ViewPerch, Spring Kit (Offset or Centered)
$16.80Strong, simple and lightweight spring perches that you can use to build your custom rear end. (sold as a pair)
Add to cartQuick View -
Add to cartQuick ViewSpacer, Spring – Hidden
$34.99Hidden adjustable spring spacer.
Allows use of 5″ or 5.5″ spring and stock mount shock.
Adjustable ring allows for easy adjustment when weight jacks are not allowed.
Add to cartQuick View -
Add to cartQuick ViewShock & Slider Adjuster (1″ COARSE X 11″ LONG)
$36.95Shock & Slider Adjuster (1″ COARSE X 11″ LONG)
Add to cartQuick View -
Add to cartQuick ViewBrackets, Trailing Arm (Multi-Hole)
$84.00This trailing arm bracket kit was designed to allow trailing arm angle adjustments just like what can be done on modifieds…..
(Sold as a Pair)
Add to cartQuick View -
Add to cartQuick ViewBolt, Weight Jack – 8″ Long
$18.991 diameter x 8 long weight jack bolt. (1″-8 Coarse Thread)
Add to cartQuick View -
Add to cartQuick ViewDecal Package
$9.95Add to cartQuick View
Reviews
There are no reviews yet.