A-Arm, Upper – Tubular (Relocated Axis) – LH (UNWELDED KIT) (MAXIMUM)
$69.99
These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 9″ from a-arm axis to center of ball joint.
SOLD AS A KIT – Welding Not Included
- Description
Description
These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 9″ from a-arm axis to center of ball joint. Use 1/2″ or 1″ tall balljoint, mounted on bottom side of a-arm.
SOLD AS A KIT – Welding Not Included
You may also like…
-
Add to cartQuick ViewA-Arm, Upper – Tubular (Relocated Axis) – RH (MAXIMUM)
$69.99These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 8″ from a-arm axis to center of ball joint.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Tubular (Relocated Axis) – LH (MAXIMUM)
$69.99These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 9″ from a-arm axis to center of ball joint.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Tubular (Relocated Axis) – RH (UNWELDED KIT) (MAXIMUM)
$69.99These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 8″ from a-arm axis to center of ball joint.
SOLD AS A KIT – Welding Not Included
Add to cartQuick View
Related Products
-
Add to cartQuick ViewTrailing Arm, Upper – OEM Reproduction w/ “Pull” Bushing
$130.50For those of you that want the benefits of the “Pull” bushing but without the hassle of installing them.
OEM reproduction stampings with our bushings installed. Sized for use with a 1/2″ bolt. These are a bolt in ready unit.
(Sold Individually)
Add to cartQuick View -
Add to cartQuick ViewTrailing Arm, Upper – DOGBONE w/ “Spherical” Bushing (MAXIMUM)
$139.49Medieval Spherical “Dogbone” Upper Trailing Arm
Add to cartQuick View -
Add to cartQuick ViewHOOD – ALUMINUM (STOCK CAR)
$280.00This fully fabricated aluminum hood for stock cars. Perfect for meshing with our 2 piece fabricated front fenders.
Add to cartQuick View -
Add to cartQuick ViewQUARTER PANEL-UPPER, 88 MONTE, FABRICATED – LEFT (STOCK CAR)
$75.00This fully fabricated upper quarter panel for 88 monte bodies. Perfect for meshing with our 2 piece fabricated lower quarter panels.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (MEDIEVAL/DEVILBISS) – RH (MAXIMUM)
$154.95Designed for use on our Medieval/Devilbiss modified chassis and any other chassis with 6″ mount.
8.0″ center to center length.
Features a QA1 weld in upper balljoint housing to reduce weight and size.
Balljoint housing has a 14 degree angle to allow for full compression without binding the stud.
Uses dual heim joints as pivots which provides zero bind through travel, even when the arm has been ‘tweaked”.
Has 7/8″ slots in shaft allowing for improved caster adjustments.
Comes with 9029-220 stud which is standard length.
See picture for additional dimensions.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – USRA (Complete) – LH
$105.80“Designed specifically for our USRA and CRUSA stock cars. They have a 6.75” center to center distance. Dual adjusters for easy caster and camber adjustments and heims joints and jam nuts included.”
Uses K772 style screw in balljoints. (Balljoint NOT included)
See picture for dimensions.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Upper-Adjustable w/ STD Stud (QA1 K5208)
$77.99Upper Ball Joint w/ STD Stud – QA1 1210-104 (K5208)
Add to cartQuick View -
Select optionsQuick ViewBall Joint, Upper (K772) w/ QA1 Stud Taper for 78-88 Metric Spindle – USRA Stock Car
$59.99Ball Joint, Upper (K772) w/ QA1 Stud Taper for 78-88 Metric Spindle – USRA Stock Car
Housing P/N: 72110505
Stud P/N: 7219032-1, .5, STDSelect optionsQuick View -
Select optionsQuick ViewGift Certificate
$25.00 – $100.00Select optionsQuick View -
Add to cartQuick ViewMount, Upper Trailing Arm – Kit (Ford 9″)
$99.00This kit includes two “Pull” bushings, two steel spools, a rectangular mount tube and side gusset bracket. Use this kit to build your own custom rear end.
Add to cartQuick View
