- Description
Description
Split trailing arm bracket design to allow installing without removing hubs onto 3” axle tube.
Designed for stock cars with a 7.5″ max trailing arm length. LR slot position is at 7.25” from axle tube.
The LR bracket is also built heavy, weighs 7.5lbs to help increase LR rear end weight.
Will increase drive and adjustability.
(Sold as a pair)
**Trailing arm bracket MUST be welded to rear end housing to keep from rotating**
You may also like…
-
Add to cartQuick View
Bolt On, Trailing Arm Bracket Kit – HEAVY, Slotted Kit (MAXIMUM)
Bolt On, Trailing Arm Bracket Kit – HEAVY, Slotted (Kit)
Add to cartQuick View -
Select optionsQuick View
Quick Change Rear End – Bare
Quick Change Rear End With 486 R&P 10″ Alum Spool and Steel Tubes.
Select optionsQuick View -
Add to cartQuick View
Bolt On, Spring Perch – Center (MAXIMUM)
Bolt On, Spring Perch Center
Add to cartQuick View -
Add to cartQuick View
Bolt On, Spring Perch – Offset (MAXIMUM)
Bolt On, Spring Perch Offset
Add to cartQuick View -
Add to cartQuick View
Quick Change Mount, Upper Trailing Arm – w/ “PULL” Bushings – Metric (MAXIMUM)
This bolt on upper trailing arm mount is designed to allow use of a quick change into a stock GM metric chassis. Built with corrected pinion angle and our proven “Pull” Bushings.
NOTE: If installing on a Frankland quick change, the bracket will need to be modified and reinforced to fit.
Add to cartQuick View -
Add to cartQuick View
Bolt On, Caliper Bracket – Small GM (MAXIMUM)
Bolt On, Caliper Bracket (Small GM)
Add to cartQuick View -
Add to cartQuick View
Bolt On, Trailing Arm Bracket Kit – Multi Hole (MAXIMUM)
Bolt On, Trailing Arm Bracket Kit Multi Hole
Add to cartQuick View -
Select optionsQuick View
Quick Change Rear End – Assembly
Quick Change Rear End Assembly 10″ Alum Spool and Steel Tubes
Select optionsQuick View
Related Products
-
Add to cartQuick View
Trailing Arm, Lower – BAREBONE (MAXIMUM)
Want a stronger trailing arm at a better price? We proudly give you the “BAREBONE”!
Same length and weight of a stock trailing arm but much stronger. Will accept any OEM type bushing.
(Sold Individually)
Add to cartQuick View -
Add to cartQuick View
Axles, Non-Floater 30″, 5×5, (28 or 31 Spline)
These new Superior 28 or 31-spline axles feature screw in studs in a 5×5 wheel bolt pattern, , ¼ thick heavy duty bearing retainer plates, and tapered wheel bearings pressed on.
Add to cartQuick View -
Add to cartQuick View
Trailing Arm, Upper – DOGBONE w/ “Pull” Bushing (MAXIMUM)
Want a stronger trailing arm plus the performance advantage of the “Pull” bushing? We proudly give you the “DOGBONE”!
Same length (11-1/8″ C to C) and weight of a stock trailing arm but much stronger. Has “Pull” bushings installed, sized for 1/2″ bolts and is a bolt in ready unit.
(Sold Individually)Add to cartQuick View -
Add to cartQuick View
Rear End Brace Kit (Main Bracket Only)
This is the main bracket for the “Rear End Brace Kits” (sold individually)
Add to cartQuick View -
Add to cartQuick View
Cup, Spring – Tapered
These tapered profile spring cups are manufactured from high strength steel and are designed to minimize any stretch and bending while still being lightweight. Has a 1/4″ hole on bottom to allow bolting to your weight jack bolt.
Add to cartQuick View -
Add to cartQuick View
Bushing, “SPHERICAL” – Trailing Arm (MAXIMUM)
MAXIMUM Spherical Bushing
Sold individually
Add to cartQuick View -
Add to cartQuick View
Brackets, Trailing Arm (Multi-Hole)
This trailing arm bracket kit was designed to allow trailing arm angle adjustments just like what can be done on modifieds…..
(Sold as a Pair)
Add to cartQuick View -
Add to cartQuick View
Clamp, Limit Chain (1-1/2” Tube) – Wehrs
1-1/2” Tube Diameter Clamp For Limit Chains on Chassis Side
Add to cartQuick View -
Add to cartQuick View
Bolt On, Trailing Arm Bracket Kit – HEAVY, Single Hole LR ONLY (MAXIMUM)
Bolt On, Trailing Arm Bracket Kit – HEAVY, Single Hole (LR Only)
Add to cartQuick View -
Add to cartQuick View
Assembly, Rear End Housing – 60″ GN (L3) w/ Sport Mod Jigged
60″ offset new reproduction stamping Ford 9″ housing with new 3″ tubes and GN hub type snouts. Housings have fill and drain plug installed. Kit includes standard 5×5 GN hubs, hub bearings, seals, brake rotor, drive flange, 31 spline solid axles and all hardware necessary.
Spring Perchs & Brake Caliper Brackets are now Bolt-On Accessories (not included in Rear End Assembly Price)
Add to cartQuick View