-
Add to cartQuick ViewPullbar Bolt Adjuster Kit (Medieval)
$75.00Easily and accurately adjust your pullbar position with this nut and bolt assembly. Simply turn the fine thread bolt and the pullbar will move side to side accordingly. No more removing spacers. ¾” Diameter x 6” long
Add to cartQuick View -
Add to cartQuick ViewMotor Mount – Front (MAXIMUM)
$25.98These bolt-on side motor mounts are designed for chevy small block and fit most all chassis manufacturers.
Add to cartQuick View -
Select optionsQuick ViewDirt Defender – AIr Cleaner Top
$29.99Dirt Defender 14″ Air Cleaner Top shape gives improved flow into the carburetor. It also provides a better seal around the edge to the air cleaner. Made in USA.
Select optionsQuick View -
Select optionsQuick ViewDirt Defender – Wheel Cover
$29.99New & Improved for better durability! This design allows you to interchange the cover between beadlock and non-beadlock wheels. No more digging through a pile of covers to find the right one! Simply keep an extra Dirt Defender cover as a spare and use it on either wheel if needed. These covers will fit most all wheels including Aero, Bart, Bassett, MRW, Keiser, Weld, and Real wheels to name a few. Made in the USA.
Non-beadlock wheel require the Dirt Defender wheel cover ring (sold separately)
Select optionsQuick View -
Add to cartQuick ViewCup, Spring – Tapered Extended (LR)
$22.34These tapered profile spring cups are manufactured from high strength steel and are designed to minimize any stretch and bending while still being lightweight. Has a 1/4″ hole on bottom to allow bolting to your weight jack bolt. This Spring Cup is extended to hold the spring while the chassis hikes for Northern Sport Mods and Limited Mods.
Add to cartQuick View -
Add to cartQuick ViewLift Plate – Motor (MAXIMUM)
$18.44The motor lift plate bolts onto 2 BBI or 4 BBI manifolds and allows the engine to be lifted. Larger middle holes allow chain hooks to slip through. Integrated hooks allow use of longer chains without “bolting”. Four mounting holes to thread bolts into when not in use.
This lift plate provides a stable and easy lifting point and creates a seal over the intake for safe storage. Made from heavy gauge steel.
Add to cartQuick View -
Add to cartQuick ViewBolt Kit – Mud Cover
$4.00This kit allows you to secure your mud cover to your wheel without any modifications. Simply slip the nut clips over the tabs and bolt the mud cover in!
Product Features:
- Locking nut clip won’t fall off wheel
- Bolts have large head to fit mud covers
- Bolt has lead in to allow quick & easy attachment of mud cover
- Kit will fit most all mud covers, mud cover rings and bead locks
- Kit allows you to be legal per IMCA rules (new for 2018)
Add to cartQuick View -
Select optionsQuick ViewSpring – 5″ X 15″ – Landrum
$90.99Landrum Performance Springs has racing spring technology down to a science. Landrum’s line of coil spring springs are made from high-grade chrome silicone for quality and consistency. All Landrum springs are manufactured to the closest tolerances and each one is dyno tested. This provides 100% certainty that you’re getting the exact spring rate you want!
5″ x 15″Select optionsQuick View -
Select optionsQuick View
Spring – 5″ X 16″ – Landrum
$83.99Landrum Performance Springs has racing spring technology down to a science. Landrum’s line of coil spring springs are made from high-grade chrome silicone for quality and consistency. All Landrum springs are manufactured to the closest tolerances and each one is dyno tested. This provides 100% certainty that you’re getting the exact spring rate you want!
5″ x 16″Select optionsQuick View -
Select optionsQuick View
Spring – 5″ X 10.5″ – Landrum
$90.99Landrum Performance Springs has racing spring technology down to a science. Landrum’s line of coil spring springs are made from high-grade chrome silicone for quality and consistency. All Landrum springs are manufactured to the closest tolerances and each one is dyno tested. This provides 100% certainty that you’re getting the exact spring rate you want!
5″ x 10.5″Select optionsQuick View -
Select optionsQuick View
Spring – 5″ X 13″ – Landrum
$90.99Landrum Performance Springs has racing spring technology down to a science. Landrum’s line of coil spring springs are made from high-grade chrome silicone for quality and consistency. All Landrum springs are manufactured to the closest tolerances and each one is dyno tested. This provides 100% certainty that you’re getting the exact spring rate you want!
5″ x 13″Select optionsQuick View -
Select optionsQuick ViewSpring – 5″ X 9.5″ – Landrum
$90.99Landrum Performance Springs has racing spring technology down to a science. Landrum’s line of coil spring springs are made from high-grade chrome silicone for quality and consistency. All Landrum springs are manufactured to the closest tolerances and each one is dyno tested. This provides 100% certainty that you’re getting the exact spring rate you want!
5″ x 9.5″Select optionsQuick View -
Select optionsQuick View
Spring – 5.5″ X 9.5″ – Landrum
$90.99 – $100.99Landrum Performance Springs has racing spring technology down to a science. Landrum’s line of coil spring springs are made from high-grade chrome silicone for quality and consistency. All Landrum springs are manufactured to the closest tolerances and each one is dyno tested. This provides 100% certainty that you’re getting the exact spring rate you want!
5.5″ x 9.5″Select optionsQuick View -
Add to cartQuick ViewMidplates – Modified (MEDIEVAL)
$53.75Used for a Chevy motor in Medieval Chassis Modifieds. (Sold as a pair)
Add to cartQuick View -
Add to cartQuick ViewMid Mount – Chevy Engine (MAXIMUM)
$24.58Used for a Chevy motor in Medieval Chassis Stock Cars. Also can be used in other brand chassis. (Sold as a pair)
Add to cartQuick View -
Add to cartQuick ViewQuick Change Mount, Upper Trailing Arm – w/ “SPHERICAL” Bushings – Metric (MAXIMUM)
$166.99This bolt on upper trailing arm mount is designed to allow use of a quick change into a stock GM metric chassis. Built with corrected pinion angle and our proven “Spherical” Bushings.
NOTE: If installing on a Frankland quick change, the bracket will need to be modified and reinforced to fit.
Add to cartQuick View -
Add to cartQuick ViewQuick Change Mount, Upper Trailing Arm – w/ “PULL” Bushings – Metric (MAXIMUM)
$125.50This bolt on upper trailing arm mount is designed to allow use of a quick change into a stock GM metric chassis. Built with corrected pinion angle and our proven “Pull” Bushings.
NOTE: If installing on a Frankland quick change, the bracket will need to be modified and reinforced to fit.
Add to cartQuick View -
Add to cartQuick ViewMedieval Military Style Hat
$22.00Medieval Military Style Hat
Add to cartQuick View -
Add to cartQuick ViewMedieval Chassis Baseball Hat
$20.00Medieval Chassis Baseball Hat
Add to cartQuick View -
Add to cartQuick ViewMedieval Metalwerx Baseball Hat
$20.00Medieval Metalwerx Baseball Hat
Add to cartQuick View -
Select optionsQuick ViewMedieval Long Sleeve
$22.00 – $31.50Medieval Long Sleeve
Select optionsQuick View -
Select optionsQuick ViewMedieval Crew Sweatshirt
$37.50 – $40.50Medieval Crew Sweatshirt
Select optionsQuick View -
Add to cartQuick ViewBushing, “SPHERICAL” – Trailing Arm (MAXIMUM)
$44.95MAXIMUM Spherical Bushing
Sold individually
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Upper-Adjustable w/1″ Stud QA1 (K5208)
$83.90Upper Ball Joint w/ 1″ Stud – QA1 1210-104 (K5208)
Add to cartQuick View -
Add to cartQuick ViewThrottle Pedal, Bearing (AFCO 40292)
$197.99This pedal has a hollow splined shaft that allows you to change off-set and index arms to suit your car. The ball bearings provide smooth, bind free travel for total throttle control.
Add to cartQuick View -
Add to cartQuick ViewFitting, Straight Push Fit (AN 8)
$7.99Brass push-on style with straight steel hose ends for use with AN 8 fitting and line.
Add to cartQuick View -
Add to cartQuick ViewFitting 90° Push Fit (AN 8)
$24.99Steel push-on style with 90° steel hose ends for use with AN 8 fitting and line.
Add to cartQuick View -
Add to cartQuick ViewAdapter, Carb – Holley Carb to AN8
$7.49This is a Holley carb to AN8 adapter fitting.
Add to cartQuick View -
Add to cartQuick ViewFitting, Straight Adapter – 1/8″ NPT Male to AN4 Male
$4.49This is an 1/8″ NPT Male to AN4 Male Straight Adapter Fitting
Add to cartQuick View -
Add to cartQuick ViewFitting, Fuel Pressure AN8 Male to AN8 Female (Russell 670350)
$15.81This is a AN 8 male on one end; AN 8 female on other, 1/8 NPT side port adapter fitting.
Add to cartQuick View -
Add to cartQuick ViewBraided Line – AN4 (60″)
$24.9960″ AN4 Braided stainless steel line.
Add to cartQuick View -
Add to cartQuick View1/8″ Female NPT TO AN4 Male 90 Degree
$8.99This is an 1/8″ female to AN4 male 90° elbow adapter fitting.
Add to cartQuick View -
Add to cartQuick ViewGauge, Fuel Pressure
$39.95Lightweight 2-5/8 fuel pressure gauge.
Add to cartQuick View -
Add to cartQuick ViewAxle, 32″ GN Solid (31 Spline)
$109.9932″ Premium GN axle.
Add to cartQuick View -
Add to cartQuick View
Axle, 29.5″ GN Solid (31 Spline)
$109.9929.5″ Premium GN axle.
Add to cartQuick View -
Add to cartQuick ViewAxle, 32″ GN Gun Drilled (31 Spline)
$199.5029.5″ Premium GN gun drilled axle.
Add to cartQuick View -
Add to cartQuick View
Axle, 29.5″ GN Gun Drilled (31 Spline)
$199.5029.5″ Premium GN gun drilled axle.
Add to cartQuick View -
Add to cartQuick ViewAssembly, Rear End Housing – 60″ GN (L3) w/ Sport Mod Jigged
$1,538.4660″ offset new reproduction stamping Ford 9″ housing with new 3″ tubes and GN hub type snouts. Housings have fill and drain plug installed. Kit includes standard 5×5 GN hubs, hub bearings, seals, brake rotor, drive flange, 31 spline solid axles and all hardware necessary.
Spring Perchs & Brake Caliper Brackets are now Bolt-On Accessories (not included in Rear End Assembly Price)
Add to cartQuick View -
Add to cartQuick ViewQUICKCAR, Mini Brake Bias Gauge (61-105) – Black
$79.95This QuickCar 2-Gauge Panel Kit is Vertical Mount Model that has Two 1,000 PSI Brake Bias Gauges that use 1/8 NPT Male Fittings.
Add to cartQuick View -
Add to cartQuick ViewMaster Cylinder – Titan (3/4″ Bore)
$43.99Titan aluminum master cylinder feature high pressure die-cast bodies from high-grade aluminum.
Add to cartQuick View -
Add to cartQuick View
Master Cylinder – Titan (7/8″ Bore)
$43.99Titan aluminum master cylinder feature high pressure die-cast bodies from high-grade aluminum.
Add to cartQuick View -
Add to cartQuick View
Master Cylinder – Titan (1″ Bore)
$43.99Titan aluminum master cylinder feature high pressure die-cast bodies from high-grade aluminum.
Add to cartQuick View -
Add to cartQuick ViewMaster Cylinder – Wilwood (3/4″ Bore)
$69.99Wilwood High-Volume Aluminum Master feature high pressure die-cast bodies from high-grade aluminum.
Add to cartQuick View -
Add to cartQuick View
Master Cylinder – Wilwood (7/8″ Bore)
$69.99Wilwood High-Volume Aluminum Master feature high pressure die-cast bodies from high-grade aluminum.
Add to cartQuick View -
Add to cartQuick View
Master Cylinder – Wilwood (1″ Bore)
$69.99Wilwood High-Volume Aluminum Master feature high pressure die-cast bodies from high-grade aluminum.
Add to cartQuick View -
Add to cartQuick ViewBrake Bias Adjuster – Crank (34″)
$34.99Crank-type balance bar adjuster cable. Enables the driver to easily adjust the brake bias. For use with dual master cylinders.
Add to cartQuick View -
Add to cartQuick ViewBraided Brake Line – AN4 (24″)
$18.99These high quality stainless steel, braided fluid lines covered over a Teflon inner liner. Size AN4 and 24″ long
Add to cartQuick View -
Add to cartQuick ViewBraided Brake Line – AN4 w/ one 90* End (24″)
$18.99These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. Size AN4 and 24″ long
Add to cartQuick View -
Add to cartQuick ViewBrake Line Retainer Clip
$1.50These brake line retainer clips are used to hold the straight line adapters (6174029) into the brake line mount tabs (MMX601-103).
Add to cartQuick View -
Add to cartQuick ViewAdapter, Straight Line – 3/8″-24 IFF to AN4
$4.99These fittings have AN 4 thread at one end and 3/8″ IFF on the other end. Used to adapter a 3/16″ steel line a steel braided AN4 line.
Add to cartQuick View -
Add to cartQuick ViewAdapter, Straight Line – 10mm-1.5 to AN4
$10.99These fittings have AN 4 thread at one end and 10mm-1.5 on the other end. It can be screwed into a GM metric caliper with 10mm-1.5 threads to adapt to a steel braided AN4 line.
Add to cartQuick View -
Add to cartQuick ViewHawk Pads (78-88 Metric) – Black
$129.99Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years.
Add to cartQuick View -
Add to cartQuick ViewBrake Caliper – Metric (LH)
$47.99Stock replacement single piston metric calipers for 78-88 GM metrics.
Add to cartQuick View -
Add to cartQuick View
Brake Caliper – Metric (RH)
$47.99Stock replacement single piston metric calipers for 78-88 GM metrics.
Add to cartQuick View -
Add to cartQuick ViewDual Pedal Assembly – Reverse Mount (Titan 600-3342)
$212.99Titan’s dual pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall, away from engine heat.
Add to cartQuick View -
Add to cartQuick ViewDual Pedal Assembly – Reverse Mount (Wilwood 340-11299)
$260.99Wilwoods new Adjustable Mount Pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall, away from engine heat.
Add to cartQuick View -
Add to cartQuick ViewBrake Line Kit – 3/16″ Steel w/ Calipers & Pads (Stock Car)
$700.00This 3/16″ steel brake line kit w/ calipers and pads is specifically designed for our Medieval stock car chassis.
Add to cartQuick View -
Add to cartQuick ViewBrake Line Kit – 3/16″ Steel (Stock Car)
$285.00This 3/16″ steel brake line kit is specifically designed for our Medieval stock car chassis.
Add to cartQuick View -
Add to cartQuick ViewHose, Socketless “Push-On” – 20ft (AN8)
$91.80Socketless “Push-On” racing fuel hose is constructed from elastomer, with a smooth inner bore for flexibility and special textile braid reinforcement for strength.
(Available in Blue or Black)
Add to cartQuick View -
Select optionsQuick ViewA-Arm, Lower – (w/ Shock Mount) – 78-88 Metric w/ QA1 Low Friction Balljoint – RH
$306.00 – $315.00These are stock lower a-arms that have our premium steel bushings (2714 & 2721), QA1 ball joint (1210-109), front side shock mount and sandblasted. STD or +.5″ length stud available.
Select optionsQuick View
Products
