-
Select optionsQuick ViewA-Arm, Lower – (w/ Shock Mount) – 78-88 Metric w/ QA1 Low Friction Balljoint – LH
$306.00 – $315.00These are stock lower a-arms that have our premium steel bushings (2714 & 2721), QA1 ball joint (1210-109), front side shock mount, and sandblasted. STD or +.5″ length stud available.
Select optionsQuick View -
Add to cartQuick ViewFAN SHROUD – 31″ 17″ FAN (2022 & OLDER)
$180.00Aluminum fan shroud for 31″ radiator and 17″ fan.
(Picture may vary from actual product)
Add to cartQuick View -
Add to cartQuick ViewFilter, Fuel – 10″ Kit (Black)
$41.99Black High Volume Fuel Filter Assembly with -8AN Ends & Element
Add to cartQuick View -
Add to cartQuick ViewFuel Cell, RCI – 22 gal (Wedge) (Black)
$418.99RCI Circle Track steel can fuel cells are manufactured with a cross-linked, high strength polyethylene bladder.
Drop Ships direct from Manufacturer
Add to cartQuick View -
Add to cartQuick ViewFuel Cell, RCI – 22 gal (Red)
$441.99RCI Circle Track steel can fuel cells are manufactured with a cross-linked, high strength polyethylene bladder.
Drop Ships direct from Manufacturer
Add to cartQuick View -
Add to cartQuick ViewFuel Cell, RCI – 16 gal (Red)
$314.99RCI Circle Track steel can fuel cells are manufactured with a cross-linked, high strength polyethylene bladder.
Drop Ships direct from Manufacturer
Add to cartQuick View -
Add to cartQuick ViewHousing, Rear End – 60″ GN (L3) w/ Sport Mod Jigged
$901.3860″ offset new reproduction stamping Ford 9″ housing with new 3″ tubes and GN hub type snouts. Housings have fill and drain plug installed. SportMod jigged.
Spring Perchs & Brake Caliper Brackets are now Bolt-On Accessories (not included in Rear End Housing Price)
(IMCA Legal)
Custom Part is Non-Returnable and Non-Refundable.
Add to cartQuick View -
Select optionsQuick ViewMedieval T-Shirt
$13.00 – $31.50Medieval T-Shirt
Select optionsQuick View -
Add to cartQuick ViewBumper, Rear – (2005 Monte)
$100.00This bumper is designed to fit the 2005 Monte Carlo tail piece.
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – (2005 Monte)
$125.00This bumper is designed to fit the 2005 Monte Carlo nose cone.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (Complete) – RH
$105.80Designed specifically for our sport mod and modifieds. They have dual adjusters for easy caster and camber adjustments. Heims joints and jam nuts included.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (Complete) – LH
$105.80Designed specifically for our sport mod and modifieds. They have dual adjusters for easy caster and camber adjustments. Heims joints and jam nuts included.
Add to cartQuick View -
Add to cartQuick ViewStud, Ball Joint (Lower) + .5″ (for QA1 K6117)
$33.95Replacement Ball Joint Stud for K6145 – QA1 9029-209 (.5″)
Add to cartQuick View -
Add to cartQuick View
Stud, Ball Joint (Lower) – STD (for QA1 K6117)
$32.95Replacement Ball Joint Stud for K6145 – QA1 9029-209 (STD)
Add to cartQuick View -
Add to cartQuick View
Stud, Ball Joint (Upper) +1″ (for QA1 K5208)
$32.95Replacement Ball Joint Stud for K5208 – QA1 9029-205 (1″)
Add to cartQuick View -
Add to cartQuick View
Stud, Ball Joint (Upper) – STD (for QA1 K5208)
$33.95Replacement Ball Joint Stud for K5208 – QA1 9029-205 (STD)
Add to cartQuick View -
Add to cartQuick View
Stud, Ball Joint (Upper) +.5″ (for QA1 K5208)
$33.95Replacement Ball Joint Stud for K5208 – QA1 9029-205 (.5″)
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Upper-Adjustable w/ STD Stud (QA1 K5208)
$77.99Upper Ball Joint w/ STD Stud – QA1 1210-104 (K5208)
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Upper-Adjustable w/ +.5″ Stud (QA1 K5208)
$77.99Upper Ball Joint w/ .5″ Stud – QA1 1210-104 (K5208)
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Lower-Adjustable w/ STD Stud (QA1 K6117)
$69.99Lower Ball Joint w/ Stock Length Stud – QA1 1210-109 (K6117)
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Lower-Adjustable w/ +.5″ Stud (QA1 K6117)
$59.99Lower Ball Joint w/.5″ Stud – QA1 1210-109 (K6145)
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Tubular (Relocated Axis) – LH (MAXIMUM)
$69.99These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 9″ from a-arm axis to center of ball joint.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Tubular (Relocated Axis) – RH (MAXIMUM)
$69.99These tubular a-arms are designed to relocate the upper a-arm axis so that it is more closely aligned with the lower a-arm axis. This will improve your caster and camber change and also reduce bump steer. Instead of moving your OEM upper a-arm mounts use this a-arm and be legal. Length 8″ from a-arm axis to center of ball joint.
Add to cartQuick View -
Add to cartQuick ViewRub Rail – Internal (Hobby Stock Straight RH)-(2018 to Present)
$84.00For use on 2018 to Present Medieval hobby stock. Passenger side ONLY.
Add to cartQuick View -
Add to cartQuick ViewRub Rail – Internal (Stock Car Layback RH) (2016-2018)
$84.00Want to have a rub rail that is light, easily replaceable and offers improved protection then these internal rub rails are a must…..
Add to cartQuick View -
Add to cartQuick ViewTab, Rub Rail
$0.85These tabs are used to hold the internal rub rails on the chassis. Also can be used for any other mounting needs.
Add to cartQuick View -
Add to cartQuick ViewShock Mount, Lower A-arm
$5.60Shock mount designed to be welded to the lower a-arm. (SOLD INDIVIDUALLY)
Add to cartQuick View -
Add to cartQuick ViewINTEGRA MAXIMUM SHOCK – LR SLICK (HOBBY STOCK)
$395.00Integra MAXIMUM Shock. LR SLICK – HOBBY STOCK
- We have taken the best technology used in super late models and applied them to Hobby Stocks.
- These are not just expensive shocks, these are speed, 1/10th’s off each lap.
- If you do not have these shocks then you do not have the “absolute best” technology. Period.
- High Gas Pressure.
Add to cartQuick View -
Add to cartQuick ViewRear End Brace Kit (Main Bracket Only)
$18.98This is the main bracket for the “Rear End Brace Kits” (sold individually)
Add to cartQuick View -
Add to cartQuick ViewRear End Brace Kit – 60″
$119.94This kit is design to reinforce the rear end so that the tubes do not bend if a wheel gets wrecked.
It will also prevent the rear end from deflecting under load and changing the alignment of the rear end while braking and under gas.(USRA Legal)
Add to cartQuick View -
Select optionsQuick ViewMedieval Mens Coat-Soft Shell
$67.00 – $76.00Medieval Mens Coat – Soft Shell
Select optionsQuick View -
Select optionsQuick ViewMedieval Ladies Coat-Soft Shell
$67.00Medieval Ladies Coat – Soft Shell
Select optionsQuick View -
Add to cartQuick ViewSpacer, Spring – Hidden
$34.99Hidden adjustable spring spacer.
Allows use of 5″ or 5.5″ spring and stock mount shock.
Adjustable ring allows for easy adjustment when weight jacks are not allowed.
Add to cartQuick View -
Select optionsQuick ViewMedieval Hoodie
$37.50 – $43.50Medieval Hoodie
Select optionsQuick View -
Add to cartQuick ViewBumper, Front – (88 Monte w/ MD3)
$125.00This bumper is designed to fit the 1988 MD3 Monte Carlo nose cone.
Add to cartQuick View -
Add to cartQuick ViewRub Rail – Internal (Stock Car Layback LH) (2011-Present)
$84.00Want to have a rub rail that is light, easily replaceable and offers improved protection then these internal rub rails are a must…..
Add to cartQuick View -
Add to cartQuick ViewHinges, Trunk Lid
$24.58These brackets are used to mount the hood or trunk lid on all stock bodies.
Sold as a pair.
Add to cartQuick View -
Add to cartQuick ViewDraglink – Improved Geometry 78-88 Metric
$133.99This is a replacement draglink for the GM 78-88 metric steering systems. It will improve the bump steer of the steering system.
Add to cartQuick View -
Add to cartQuick ViewBrackets, Trailing Arm (Hobby Stock)
$50.40Designed for the Hobby stocks, these trailing arm brackets have the lowest mounting hole position possible. 2.50″ from axle tube to center of hole.
(Sold as a Pair)
Add to cartQuick View -
Add to cartQuick ViewTrailing Arm, Lower – BAREBONE (MAXIMUM)
$53.60Want a stronger trailing arm at a better price? We proudly give you the “BAREBONE”!
Same length and weight of a stock trailing arm but much stronger. Will accept any OEM type bushing.
(Sold Individually)
Add to cartQuick View -
Add to cartQuick ViewTrailing Arm, Upper – BAREBONE (MAXIMUM)
$65.00Want a stronger trailing arm at a better price? We proudly give you the “BAREBONE”!
Same length and weight of a stock trailing arm but much stronger. Will accept any OEM type bushing.
(Sold Individually)
Add to cartQuick View -
Add to cartQuick ViewTurn Down – 7inch 45 degree
$39.99Turn down – 7inch 45 degree
(Sold as a Pair)
Add to cartQuick View -
Add to cartQuick ViewHeader, Speedwerx Gen1
$1,195.00These hybrid triple stepped headers have been designed to give you the best benefits of a stock clip header and an over rail header.
Add to cartQuick View -
Add to cartQuick ViewTrailing Arm, Upper – DOGBONE w/ “Pull” Bushing (MAXIMUM)
$109.50Want a stronger trailing arm plus the performance advantage of the “Pull” bushing? We proudly give you the “DOGBONE”!
Same length (11-1/8″ C to C) and weight of a stock trailing arm but much stronger. Has “Pull” bushings installed, sized for 1/2″ bolts and is a bolt in ready unit.
(Sold Individually)Add to cartQuick View -
Add to cartQuick ViewAxles, Non-Floater 30″, 5×4 3/4, (31 Spline)
$325.00These new Currie 31-spline axles feature press in studs in a 5×4 3/4 wheel bolt pattern, , ¼ thick heavy duty bearing retainer plates, and tapered wheel bearings pressed on.
Add to cartQuick View -
Add to cartQuick View
Axles, Non-Floater 30″, 5×5, (28 or 31 Spline)
$325.00These new Superior 28 or 31-spline axles feature screw in studs in a 5×5 wheel bolt pattern, , ¼ thick heavy duty bearing retainer plates, and tapered wheel bearings pressed on.
Add to cartQuick View -
Add to cartQuick ViewMount, Upper Trailing Arm – Kit (Ford 9″)
$103.00This kit includes two “Pull” bushings, two steel spools, a rectangular mount tube and side gusset bracket. Use this kit to build your own custom rear end.
Add to cartQuick View -
Add to cartQuick ViewPlate, Hood Pin Mount
$2.24These aluminum hood pins plates are thicker to provide increased durability versus the thin steel ones normally found in kits. Sized for ½ diameter hood pin. (Sold as pair)
Add to cartQuick View -
Add to cartQuick ViewMount, Weight Jack Bolt
$25.70Stop messing around using 1 nut from the local hardware store to make a weight jack mount. (Sold Individually)
Add to cartQuick View -
Add to cartQuick ViewTab, Brake Line Mount
$1.68These brake line mount tabs are used to securely hold the adapter fitting used to adapter your brake line to your braided line.
Add to cartQuick View -
Add to cartQuick ViewBattery Box (11″)
$30.00Medieval premium lightweight battery tray with hold down bracket and bolts.
Add to cartQuick View -
Add to cartQuick ViewRub Rail – Internal (Hobby Stock Straight LH) (2010 to Present)
$84.00Want to have a rub rail that is light, easily replaceable and offers improved protection then these internal rub rails are a must.
Add to cartQuick View -
Add to cartQuick ViewRub Rail – Rear
$22.40Light and strong, these rub rails are designed to be used on the rear frame clip. The radius corners prevent another racer from being able to hook your car with their bumper. (Sold Individually)
Add to cartQuick View -
Add to cartQuick ViewPlates, Bumper Mount
$11.20These bumper mount plates can be welded to your chassis to allow the use of our bumpers. (Sold as pair)
Add to cartQuick View -
Add to cartQuick ViewBumper, Rear – (91-96 Monte/Gran Prix/Lumina)
$100.00This bumper is designed to fit the 91-96 Monte Carlo/Gran Prix tail piece.
Add to cartQuick View -
Add to cartQuick ViewBumper, Rear – (88 Monte/ABC Universal)
$125.00This bumper is designed to fit the 1988 Monte Carlo and the ABC Universal tail piece.
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – (91-96 Cutlass/Regal)
$125.00This bumper is designed to fit the 91-96 Cutlass/Regal nose cones.
Add to cartQuick View -
Add to cartQuick View
Bumper, Front – (91-96 Monte/Gran Prix/Lumina)
$125.00This bumper is designed to fit the 91-96 Monte Carlo nose cone.
Add to cartQuick View -
Add to cartQuick ViewLT1 Performance Exhaust Manifold Adapters
$209.95These adapters allow you to bolt the LT1 style cast exhaust manifolds to any standard GM head. They provide consistent clamping force on the exhaust gaskets, space the exhaust manifold away from the valve cover and are profiled from square shaped port on the head to the d shaped port on the manifold allowing for a smooth transition and increased flow.
Add to cartQuick View -
Add to cartQuick ViewBolt, Weight Jack – 8″ Long
$18.991 diameter x 8 long weight jack bolt. (1″-8 Coarse Thread)
Add to cartQuick View
Products
