-
Add to cartQuick ViewRUB RAIL, MOD LITE (LH)
$30.00Rub Rail, LH – Medieval Mod Lite
Add to cartQuick View -
Add to cartQuick ViewRUB RAIL, MOD LITE (RH)
$30.00Rub Rail, RH – Medieval Mod Lite
Add to cartQuick View -
Add to cartQuick ViewMOUNT, PANHARD BAR – (3 LINK CLIMBER) WEHRS
$145.00Panhard bar mount used on chassis side of Medieval/Devilbiss modifieds and sport mods.
Add to cartQuick View -
Add to cartQuick ViewMOUNT, PANHARD BAR – (3 HOLE 2X2) WEHRS
$66.00Panhard bar mount used on chassis side of Medieval/Devilbiss modifieds and sport mods.
Add to cartQuick View -
Add to cartQuick ViewQuick Adjust Puck – 1/2″ ID
$5.00Quick adjust puck for suspension cages.
Add to cartQuick View -
Add to cartQuick ViewSpacer, 5/8″ High Misalignment – 3/4″ Long
$8.755/8” high misalignment spacer 1/2″ ID 3/4” long. Measured from end of spacer to the heim.
- Measurement is not total overall length.
Add to cartQuick View -
Add to cartQuick ViewSuspension Tube, 5/8″ -18 Thread – 14″ Long
$25.00Machined thick wall DOM 5/8″ suspension tube with 13/16″ hex on each end. Lasered with length and thread direction for your convenience. This tube is 14″ long.
Add to cartQuick View -
Add to cartQuick ViewSuspension Tube, 5/8″ -18 Thread – 12″ Long
$25.00Machined thick wall DOM 5/8″ suspension tube with 13/16″ hex on each end. Lasered with length and thread direction for your convenience. This tube is 12″ long.
Add to cartQuick View -
Add to cartQuick ViewSpacer, 5/8″ High Misalignment – 1-3/8″ Long
$9.505/8″ heim 1/2″ bolt high misalignment spacer 1-3/8″ long. Measured from the end of spacer to the heim.
- Measurement is not total overall length.
Add to cartQuick View -
Add to cartQuick ViewSpacer, 5/8″ High Misalignment – 1-3/4″ Long
$9.505/8″ heim 1/2″ bolt high misalignment spacer 1-3/4″ long. Measured from end of spacer to the heim.
- Measurement is not total overall length.
Add to cartQuick View -
Add to cartQuick ViewSpacer, 5/8″ High Misalignment – 2-1/4″ Long
$10.005/8″ heim 1/2″ bolt high misalignment spacer 2-1/4″ long. Measured from end of spacer to the heim.
- Measurement is not total overall length.
Add to cartQuick View -
Add to cartQuick ViewAluminum Kit, Interior Cockpit (USRA or WISSOTA Stock Car) – Gloss Black (2016-2022)
$454.00Interior cockpit aluminum kit used on USRA or Wissota stock cars. This is a full cockpit. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick ViewAluminum Kit, Interior Wall (IMCA/USRA Stock Car) – Gloss Black (2016-2022)
$216.00Interior wall aluminum kit used on IMCA or USRA stock cars. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick ViewAluminum Kit, Rear Deck (IMCA/USRA/WISSOTA Stock Car) – Gloss Black (2016-2022)
$405.00Rear deck and firewall used on IMCA, USRA or WISSOTA stock cars. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick ViewAluminum Kit, Dash (IMCA/USRA/WISSOTA Stock Car) – Gloss Black (2016-2022)
$351.00Dash aluminum kit used on IMCA, USRA or WISSOTA stock cars. Gloss Black (2016-2022)
Add to cartQuick View -
Add to cartQuick ViewSpring – 5″ X 20″ (125) Swift
$149.00SWIFT 5″ X 20″ SPRING (125)
PERFECT FOR LR ON USRA STOCK CARS.
Add to cartQuick View -
Add to cartQuick ViewClamp, Limit Chain (1-1/2” Tube) – Wehrs
$25.001-1/2” Tube Diameter Clamp For Limit Chains on Chassis Side
Add to cartQuick View -
Add to cartQuick ViewPENSKE MAXIMUM Shock – RR (MOD)
$695.00Penske MAXIMUM Shock. RR – MOD
- We have taken the best technology used in super late models and applied them to Modifieds.
- These are not just expensive shocks, these are speed, 1/10th’s off each lap.
- If you do not have these shocks then you do not have the “absolute best” technology. Period.
Add to cartQuick View -
Add to cartQuick ViewPENSKE MAXIMUM Shock – RF (MOD)
$695.00Penske MAXIMUM Shock. RF – MOD
- We have taken the best technology used in super late models and applied them to Modifieds.
- These are not just expensive shocks, these are speed, 1/10th’s off each lap.
- If you do not have these shocks then you do not have the “absolute best” technology. Period.
Add to cartQuick View -
Add to cartQuick ViewPENSKE MAXIMUM Shock – LR BASE (MOD)
$695.00Penske MAXIMUM Shock. LR BASE – MOD
- We have taken the best technology used in super late models and applied them to Modifieds.
- These are not just expensive shocks, these are speed, 1/10th’s off each lap.
- If you do not have these shocks then you do not have the “absolute best” technology. Period.
Add to cartQuick View -
Add to cartQuick ViewPENSKE MAXIMUM Shock – LF (MOD)
$695.00Penske MAXIMUM Shock. LF – MOD
- We have taken the best technology used in super late models and applied them to Modifieds.
- These are not just expensive shocks, these are speed, 1/10th’s off each lap.
- If you do not have these shocks then you do not have the “absolute best” technology. Period.
Add to cartQuick View -
Add to cartQuick ViewROD END (RH) 5/8″-18 MALE
$9.995/8-18 right hand male standard rod end. They have a carbon steel body and a hardened steel ball.
Add to cartQuick View -
Add to cartQuick ViewFloorpan – Modified Chassis
$227.501/8″ aluminum floorpan to fit Medieval & Devilbiss modified chassis.
Add to cartQuick View -
Add to cartQuick ViewCOLLAR, LOCK – 9/16″ (HOOD/TRUNK PINS)
$6.95ALUMINUM LOCK COLLAR PERFECT FOR SETTING THE HOOD AND TRUNK HEIGHTS ON OUR CHASSIS
(SOLD INDIVIDUALLY)
Add to cartQuick View -
Add to cartQuick ViewSTEERING POST ASSEMBLY – MEDIEVAL STOCK CAR (AFTERMARKET BOX, NO QUICKENER)
$221.70STEERING POST ASSEMBLY TO FIT OUR STOCK CAR CHASSIS
USES A 13/16″-36 SPLINE U-JOINT TO CONNECT TO SWEET OR KSE GEARBOX
3/4″ DOM TUBING, LEFT LONG TO TRIM AND INSTALL QUICK RELEASE
USES (2) 3/4″ OVERSIZED ROD END AND JAM NUTS TO MOUNT (NOT INCLUDED)
Add to cartQuick View -
Add to cartQuick ViewSTEERING POST ASSEMBLY – MEDIEVAL/DEVILBISS MODIFIED
$265.00STEERING POST ASSEMBLY TO FIT OUR MODIFIED CHASSIS
USES A 13/16″-36 SPLINE U-JOINT TO CONNECT TO SWEET OR KSE GEARBOX
3/4″ DOM TUBING, LEFT LONG TO TRIM AND INSTALL QUICK RELEASE
USES (2) 3/4″ OVERSIZED ROD END AND JAM NUTS TO MOUNT (NOT INCLUDED)
Add to cartQuick View -
Add to cartQuick ViewSWINGARM – MOD (5/8″) – 13″ (MAXIMUM)
$65.00Lower swingarm suspension link designed to give maximum forward drive!
Add to cartQuick View -
Add to cartQuick ViewMount, Pinion Panhard 9″ Ford (Right Side Climber, Steel)
$130.00MAXIMUM Performance right side climbing panhard mount for Ford 9″ rear ends. (Steel)
Mounts J-Bar to 9″ third-member – 4 3/8″ offset from pinion.
Add to cartQuick View -
Add to cartQuick ViewMount, Pinion Panhard QC (Right Side Climber, Steel)
$130.00MAXIMUM Performance right side climbing panhard mount for quick change rear ends. (Steel)
Mounts J-Bar to QC rear end – 4 3/8″ offset from pinion.
Add to cartQuick View -
Add to cartQuick ViewBrake Line Kit – 3/16″ Steel (MOD)
$325.00This 3/16″ steel brake line kit is specifically designed for our Medieval/Devilbiss MOD chassis.
Add to cartQuick View -
Add to cartQuick ViewQUICKCAR, 2 – 1 Gauge Panel – 5″ Tach- OP/WH BK
$389.95QuickCar’s LED backlit Oil Pressure, 5” Tachometer, and Water Temperature standard mechanical gauges mounted in a black panel measuring 11-7/8” wide and 4-1/2” tall. Panel comes complete with all sending units, warning lights, and wiring for easy installation. Water Temp. gauge comes with a 1/2”-NPT adapter to mount in the intake of almost any high-performance engine while Oil Pressure has a standard 1/8”-NPT fitting for plumbing lines (sold separately). Tachometer has a 5” display from 0-10,000 RPM’s with a single high recall and can be used with a 4-cylinder, 6-cylinder, or V8 engine. Warning lights activate when Oil Pressure drops below 20 PSI, Water Temp. goes above 235°F.
Add to cartQuick View -
Add to cartQuick ViewShift Linkage Kit – Modified (Single)
$44.59Shift linkage rod kit specifically designed for modifieds.
Add to cartQuick View -
Add to cartQuick ViewThrottle Rod Linkage Kit – Modified
$33.59Throttle linkage rod kit specifically designed for modified chassis.
Add to cartQuick View -
Add to cartQuick ViewBump Steer Pro (Toby Race Products)
$2,995.00TOBY Race Products is at it again with this ingenious bump steer machine. This patent pending machine along with the patent pending Accu Bump Technology will take bump steering your car from an hour long job to just minutes. No more hassling with a pump jack or trying to read dial indicators, this machine just tells you if it is bumping in or out and by how much. With accuracy and repeatability of less than .001″, bump steering your car can been done at a push of a button. Uses Milwaukee M18 style battery. (Battery and charger sold separately)
MSRP $2,995.00
Preorder from now until January and save $500
Shipping estimated to start in January
Add to cartQuick View -
Select optionsQuick ViewHeader – Schoenfeld – Rear/Side Exit
$299.95 – $399.95Schoenfeld – Rear/Side Exit for USRA, IMCA, Durrance Layne Stock Cars with Fabricated Firewall.
Select optionsQuick View -
Select optionsQuick View
Body Kit, Modified – B Mod / Sport Mod (Medieval)
$1,111.00Alumn. Body Kit for B-Mod / Sport Mod
Kit includes: (all qty 1, except where noted)
- Roof (Complete)
- Sail Panel – LH (B Mod)
- Sail Panel – RH (B Mod)
- A-Pillar – LH
- A-Pillar – RH
- Hood (Complete)
- Nose Wing – LH
- Nose Wing – RH
- Nose Lower
- Nose Upper
- Door Panel – LH
- Door Panel – RH
- Quarter Panel – LH
- Quarter Panel – RH
- Spoiler (B Mod)
- Spoiler Support – LH
- Spoiler Support – RH
- Spoiler Support – Middle
- Body Brace Kit
Standard Color Options: Gloss White, Gloss Black & Flat Black
*Other Colors call to order*Select optionsQuick View -
Add to cartQuick ViewFuel Cell, RCI – 22 gal (Red)
$441.99RCI Circle Track steel can fuel cells are manufactured with a cross-linked, high strength polyethylene bladder.
Drop Ships direct from Manufacturer
Add to cartQuick View -
Add to cartQuick ViewHousing, Rear End – 60″ GN (L3) w/ Sport Mod Jigged
$901.3860″ offset new reproduction stamping Ford 9″ housing with new 3″ tubes and GN hub type snouts. Housings have fill and drain plug installed. SportMod jigged.
Spring Perchs & Brake Caliper Brackets are now Bolt-On Accessories (not included in Rear End Housing Price)
(IMCA Legal)
Custom Part is Non-Returnable and Non-Refundable.
Add to cartQuick View -
Add to cartQuick ViewAxles, Non-Floater 30″, 5×4 3/4, (31 Spline)
$325.00These new Currie 31-spline axles feature press in studs in a 5×4 3/4 wheel bolt pattern, , ¼ thick heavy duty bearing retainer plates, and tapered wheel bearings pressed on.
Add to cartQuick View
Products
