-
Add to cartQuick ViewTrailing Arm, Upper – BAREBONE (MAXIMUM)
$65.00Want a stronger trailing arm at a better price? We proudly give you the “BAREBONE”!
Same length and weight of a stock trailing arm but much stronger. Will accept any OEM type bushing.
(Sold Individually)
Add to cartQuick View -
Add to cartQuick ViewSeal, Axle Housing (Inner)
$61.99Axle Housing Inner Seal for 9 Inch GN Rearends. Three O-rings that seal it to the axle tube and two bonded, heavy duty inner seals designed to compensate for any amount of axle shaft run out. Keeps gear oil in the center section. 2.625″ Housing Tube Size.
Add to cartQuick View -
Add to cartQuick ViewDraglink – 78-88 Metric
$60.99This is a premium OEM replacement draglink for the GM 78-88 metric steering systems.
Add to cartQuick View -
Add to cartQuick ViewBRACKETS, TRAILING ARM – 2.75″ (CRUSA)
$60.00Designed for the CRUSA stocks, these trailing arm brackets have the lowest mounting hole position possible. 2.75″ from axle tube to center of hole.
(Sold as a Pair)
Add to cartQuick View -
Add to cartQuick ViewScrew Jack Mount, Clamp On – 1 1/2″ Tube (WEHRS)
$60.00Use this clamp on mount for the REAR shock mounts on all Medieval.
Uses Shock & Spring Adjuster (1″ coarse) (sold separately)
Add to cartQuick View -
Add to cartQuick ViewPITMAN ARM (68-72 GM)
$59.99Pitman arm for 800 series power steering boxes. For 1964-72 chevelle steering systems.
- 5.00″ Center to Center, 1.21″ Hole Diameter, 0.75″ Drop
- 32 and 4 master Spline Count
- Forged steel construction for maximum strength
- Spline size fits GM 800 series power steering boxes
Add to cartQuick View -
Add to cartQuick ViewPITMAN ARM (78-88 GM METRIC)
$59.99Pitman arm for 800 series power steering boxes. For 1978-1988 G body steering systems.
- 6.50″ Center to Center
- 32 and 4 master Spline Count
- Forged steel construction for maximum strength
- Spline size fits GM 800 series power steering boxes
Add to cartQuick View -
Add to cartQuick ViewShifter – 2– Lever
$59.996061 Aluminum 2 lever shifter specifically designed for circle track racers!
Ergonomic and ultra lightweight open levers with correct spacing to allow easy shifting. The mount is designed as a multi piece configuration to allow for easy shifter hole cutting in your tunnel. The design also makes it much easier to assemble and install into the car without losing any parts.
Shift rod holes are 5/16 diameter and spaced ½” apart to give perfect alignment with shift rod and transmission.
Anodized a “dry slick” black for a sleek appearance.
Add to cartQuick View -
Select optionsQuick ViewBall Joint, Upper (K772) w/ QA1 Stud Taper for 78-88 Metric Spindle – USRA Stock Car
$59.99Ball Joint, Upper (K772) w/ QA1 Stud Taper for 78-88 Metric Spindle – USRA Stock Car
Housing P/N: 72110505
Stud P/N: 7219032-1, .5, STDSelect optionsQuick View -
Add to cartQuick ViewBall Joint, Lower-Adjustable w/ +.5″ Stud (QA1 K6117)
$59.99Lower Ball Joint w/.5″ Stud – QA1 1210-109 (K6145)
Add to cartQuick View -
Add to cartQuick ViewPRE-LOAD BEARING SPACER – GM METRIC
$58.99Allows your front hubs to be tight with minimal drag and side pre-load
Add to cartQuick View -
Select optionsQuick ViewMEDIEVAL FLANNEL
$45.00 – $56.00MEDIEVAL FLANNEL
Select optionsQuick View -
Add to cartQuick ViewBolt On, Clamp – 3″ ID (MAXIMUM)
$55.99Add to cartQuick View -
Add to cartQuick ViewGIRDLE, U-JOINT (FOR QUICK CHANGE YOKE)
$55.99Fast Shaft Brand u-joint girdle to hold yoke on quick change rear ends.
High quality lightweight aluminum.
1-1/16″ Cap Diameter
(sold in pair)
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Upper – 20032-2LF (Low Friction)
$55.99Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – USRA (Bare) – RH
$55.94“Designed specifically for our USRA and Durrence Lane stock cars. They have a 6.75” center to center distance. Dual adjusters, heim joints and jam nuts not included.”
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – USRA (Bare) – LH
$55.94Designed specifically for our USRA and Durrence Lane stock cars. They have a 6.75” center to center distance. Dual adjusters, heim joints and jam nuts not included.”
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (Bare) – LH (MAXIMUM)
$55.94Designed specifically for our sport mod and modifieds. Dual adjusters, heim joints and jam nuts not included.
Add to cartQuick View -
Add to cartQuick ViewA-Arm, Upper – Modified (Bare) – RH (MAXIMUM)
$55.94Designed specifically for our sport mod and modifieds. Dual adjusters, heim joints and jam nuts not included.
Add to cartQuick View -
Add to cartQuick ViewQuick Change Pull Bar Mount – Standard (MAXIMUM)
$55.00Add to cartQuick View -
Add to cartQuick ViewBall Joint, Lower – 20039LF (Low Friction) – 78-88 Metric
$54.99Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Upper – 20032LF (Low Friction) 78-88 Metric
$54.99Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Add to cartQuick ViewPower Steering Mount (Mod Lite)
$54.95Power Steering Hanger Mount – Used on Medieval Mod Lites
Add to cartQuick View -
Add to cartQuick ViewQUICKCAR, Ignition Panel w/ Flip Switch and Light
$54.95This QuickCar Switch Panel comes with 1 ignition switch and 1 starter button installed in a checkered black plate. The double pole ignition switch is covered with a red flip cover and has a red indicator light. The panel dimensions are 3-3/8″ wide and 4-1/4″ tall.
Add to cartQuick View -
Add to cartQuick ViewQUICKCAR, Ignition Panel w/ Flip Switch And Light
$54.95This QuickCar Switch Panel comes with 1 ignition switch and 1 starter button installed in a checkered flag designed plate. The double pole ignition switch is covered with a red flip cover and has a red indicator light. The panel dimensions are 3-3/8″ wide and 4-1/4″ tall. Panel comes assembled and pre-wired with mounting holes already punched out to make installation simple.
Add to cartQuick View -
Add to cartQuick ViewShift Linkage – Stock Car (Manual Transmission)
$54.79Shift linkage rod kit specifically designed for stock car chassis.
Add to cartQuick View -
Add to cartQuick ViewMidplates – Modified (MEDIEVAL)
$53.75Used for a Chevy motor in Medieval Chassis Modifieds. (Sold as a pair)
Add to cartQuick View -
Add to cartQuick ViewTrailing Arm, Lower – BAREBONE (MAXIMUM)
$53.60Want a stronger trailing arm at a better price? We proudly give you the “BAREBONE”!
Same length and weight of a stock trailing arm but much stronger. Will accept any OEM type bushing.
(Sold Individually)
Add to cartQuick View -
Add to cartQuick ViewBrackets, Trailing Arm (Hobby Stock)
$50.40Designed for the Hobby stocks, these trailing arm brackets have the lowest mounting hole position possible. 2.50″ from axle tube to center of hole.
(Sold as a Pair)
Add to cartQuick View -
Add to cartQuick ViewBrackets, Trailing Arm (Single Hole)
$50.40Designed for the Wissota street stocks, these trailing arm brackets have the lowest mounting hole position possible. 4.0″ from axle tube to center of hole.
(Sold as a Pair)
Add to cartQuick View -
Add to cartQuick ViewBumper, Front – Mod Lite
$50.00Front Bumper – Medieval Mod Lite
Add to cartQuick View -
Add to cartQuick ViewBRACKET, TRAILING ARM (MULTI-HOLE) – RR ONLY
$50.00RR multi hole trailing arm bracket only.
Add to cartQuick View -
Add to cartQuick ViewBRACKET, 3 LINK, NSM MOD, BOLT ON – LH (MEDIEVAL ONLY 2016-2018)
$50.00BRACKET, 3 LINK, NSM MOD, BOLT ON – LH (MEDIEVAL ONLY 2016-2018)
Add to cartQuick View -
Add to cartQuick ViewBRACKET, 3 LINK, NSM MOD, BOLT ON – RH (MEDIEVAL ONLY 2016-2018)
$50.00BRACKET, 3 LINK, NSM MOD, BOLT ON – RH (MEDIEVAL ONLY 2016-2018)
Add to cartQuick View -
Add to cartQuick ViewBRACKET, CHASSIS PANHARD, BOLT ON – 3 INCH OFFSET (PAIR)
$50.00BRACKET, CHASSIS PANHARD, BOLT ON – 3 INCH OFFSET (PAIR)
Add to cartQuick View -
Add to cartQuick ViewMount, Rub Rail – Stock Car (Right Side-Rear) (2023-Present)
$50.00This is the REAR inner mount that bolts to a Medieval stock car chassis and supports the outer rub rail.
Add to cartQuick View -
Add to cartQuick ViewMount, Rub Rail – Stock Car (Right Side-Front) (2023-Present)
$50.00This is the FRONT inner mount that bolts to a Medieval stock car chassis and supports the outer rub rail.Add to cartQuick View -
Add to cartQuick ViewPlates, 4 Link LH – Modified Chassis
$50.00Replacement LH four link plates used on Medieval modified chassis.
Qty 2, sold as pair
Used for A-Mods, B-Mods, MWM, Limited Mods
Add to cartQuick View -
Add to cartQuick ViewPlates, 4 Link RH – Modified Chassis
$50.00Replacement RH four link plates used on Medieval modified chassis.
Qty 2, sold as pair
Used for A-Mods, B-Mods, MWM, Limited Mods
Add to cartQuick View -
Add to cartQuick ViewMount, Rub Rail – Modified (Right Side)
$50.00This is the inner mount that bolts to a Medieval chassis and supports the outer rub rail. Qty 2 needed per chassis.
Add to cartQuick View -
Add to cartQuick ViewGIRDLE, U-JOINT (FOR SHORT NARROW YOKE)
$49.99Moroso Brand u-joint girdle to hold “short narrow” 3rd member yokes on ford 9″ rear ends.
High quality lightweight aluminum. Anodized gold for easy identification.
1-1/16″ Cap Diameter
(sold in pair)
Add to cartQuick View -
Add to cartQuick ViewShifter – 1– Lever
$49.996061 Aluminum 1 lever shifter specifically designed for circle track racers!
Add to cartQuick View -
Add to cartQuick ViewROTOR – PROLITE VENTED (11.75 X .810)
$47.99Add to cartQuick View -
Add to cartQuick ViewBrake Caliper – Metric (LH)
$47.99Stock replacement single piston metric calipers for 78-88 GM metrics.
Add to cartQuick View -
Add to cartQuick View
Brake Caliper – Metric (RH)
$47.99Stock replacement single piston metric calipers for 78-88 GM metrics.
Add to cartQuick View -
Add to cartQuick ViewBall Joint, Lower – 106200381LF (Low Friction)
$46.95Correct your front suspension geometry or create a completely free moving suspension with these performance ball joints.
Add to cartQuick View -
Add to cartQuick ViewBolt On, Spring Perch – Center (MAXIMUM)
$45.86Bolt On, Spring Perch Center
Add to cartQuick View -
Add to cartQuick ViewBolt On, Spring Perch – Offset (MAXIMUM)
$45.86Bolt On, Spring Perch Offset
Add to cartQuick View -
Add to cartQuick ViewBRACKET, CHASSIS PANHARD, BOLT ON – MOD LITE (PAIR)
$45.00Bolt in panhard bar brackets for Medieval Mod Lite chassis.
(Sold as a pair)
Add to cartQuick View -
Add to cartQuick ViewQuick Change Pull Bar Mount – Forward
$45.00Add to cartQuick View -
Add to cartQuick ViewGIRDLE, U-JOINT (FOR SHORT or LONG WIDE YOKE)
$44.99Moroso Brand u-joint girdle to hold “short wide” 3rd member yokes on ford 9″ rear ends.
High quality lightweight aluminum. Anodized blue for easy identification.
1-1/8″ Cap Diameter
(sold in pair)
Add to cartQuick View -
Add to cartQuick ViewBushing, “SPHERICAL” – Trailing Arm (MAXIMUM)
$44.95MAXIMUM Spherical Bushing
Sold individually
Add to cartQuick View -
Add to cartQuick ViewREAR END BALLAST MOUNT
$44.86Clamp-On Ballast Mount – 3″ Tube
Sold as a Pair
Add to cartQuick View -
Add to cartQuick ViewShift Linkage Kit – Modified (Single)
$44.59Shift linkage rod kit specifically designed for modifieds.
Add to cartQuick View -
Add to cartQuick ViewMaster Cylinder – Titan (3/4″ Bore)
$43.99Titan aluminum master cylinder feature high pressure die-cast bodies from high-grade aluminum.
Add to cartQuick View -
Add to cartQuick View
Master Cylinder – Titan (7/8″ Bore)
$43.99Titan aluminum master cylinder feature high pressure die-cast bodies from high-grade aluminum.
Add to cartQuick View -
Add to cartQuick View
Master Cylinder – Titan (1″ Bore)
$43.99Titan aluminum master cylinder feature high pressure die-cast bodies from high-grade aluminum.
Add to cartQuick View -
Add to cartQuick ViewShift Linkage Kit – Stock Car (Automatic)
$43.59Shift linkage rod kit specifically designed for stock car chassis.
Add to cartQuick View -
Select optionsQuick ViewMedieval Hoodie
$37.50 – $43.50Medieval Hoodie
Select optionsQuick View -
Add to cartQuick ViewShock Mount, Adjustable (3/4″-10 x 8″)
$42.95Shock Mount – Adjustable (3/4-10 x 8″)
Add to cartQuick View
Products
